In order to participate in the GunBroker Member forums, you must be logged in with your GunBroker.com account. Click the sign-in button at the top right of the forums page to get connected.

steven 200 cal 243

foxgunsfoxguns Member Posts: 15 ✭✭
edited December 2008 in Ask the Experts
i am trying to mount a nikon pro staff on a stevens 200 cal 243 and ai am having problems finding a base and rings that will allow this any help would be great
· Share on FacebookShare on Twitter

Comments

  • tsr1965tsr1965 Member Posts: 8,682 ✭✭
    edited November -1
    Get yourself a good Weaver style STEEL base from Leupold, Weaver, or Burris, and Top it off with medium height Weaver/ATK Qual Lock rings(Used to be Simmons 4x4). I prefer the steel over aluminum alloy. Don't forget to use the Loctite on the screws for the bases.

    Best
    · Share on FacebookShare on Twitter
  • quickmajikquickmajik Member Posts: 15,576 ✭✭✭
    edited November -1
    Warne makes a 2 piece base set for the stevens 200
    · Share on FacebookShare on Twitter
  • tallpaulrtallpaulr Member Posts: 18 ✭✭
    edited November -1
    you might need to find a set of extended rings that will work on your bases that move the rings about an inch forward of back from the point where they atttach to the rifle, I n i remeber correctly i had this porblem that the scope mounting points where soo short to reach both ends fo the action. hope that helps
    · Share on FacebookShare on Twitter
Sign In or Register to comment.