In order to participate in the GunBroker Member forums, you must be logged in with your GunBroker.com account. Click the sign-in button at the top right of the forums page to get connected.

Winchester 121 bolt

savage204savage204 Member Posts: 72 ✭✭
edited December 2008 in Ask the Experts
Does anyone have any idea on how to get the bolt out of this rifle? I pulled the bolt up and back. Then pulled the trigger and pulled on the bolt, but she just won't come out. I took the stock off and it looks like the trigger has nothing to do with removing the bolt,,,someone please help,,,I can't find anything about it
in my books. I'm lost,,,,,,,,,[:(]
· Share on FacebookShare on Twitter

Comments

  • GenerGener Member Posts: 3 ✭✭
    edited November -1
    Raise the bolt and pull it all the way back. Look at the bolt face, the will be a thin blade showing coming up from below, with a small tool push this down while withdrawing the bolt from the receiver.
    · Share on FacebookShare on Twitter
  • savage204savage204 Member Posts: 72 ✭✭
    edited November -1
    quote:Originally posted by Gener
    Raise the bolt and pull it all the way back. Look at the bolt face, the will be a thin blade showing coming up from below, with a small tool push this down while withdrawing the bolt from the receiver.

    Eureka, WOW!!!!thanks so much for the help,,,so simple and yet I could not figure it. The gun was given to me a long time ago. I did not mess
    with it because the bolt sticks when pulled half way back. I think
    maybe an ejector is bent. Thanks again,,,you have been a great help.

    Joe
    · Share on FacebookShare on Twitter
Sign In or Register to comment.