In order to participate in the GunBroker Member forums, you must be logged in with your GunBroker.com account. Click the sign-in button at the top right of the forums page to get connected.
Converted 45 revolver again
Tracker1957
Member Posts: 6 ✭✭
I have what appears to be a 45 Colt revolver that was converted to a 22. The barrel is a Remington but the body appears to be a Colt. You can see where inserts were put into the cylinders to convert them. Someone mentioned that it may have been used by the military and converted because the ammo was to expensive. The revolver has no serial numbers that I can find. The only inscription is Remington on the barrel. I can send pictures if needed. Any information would be greatly appreciated.
Comments
With the markings buffed off for the Bubba nickel plate, there is no knowing if it were originally military or not. The military did NOT do the conversion, it was a gunsmith job on at most a surplus revolver. With no markings, there is no way of knowing who did the work or when. The Remington trademark shows only that he used a piece of barrel off a Remington .22 rifle instead of relining the Colt.
There just isn't much information there, what you see is what you have.