Remington 12 Rifle Measurment needed

gnprts

I need the distance from the front of receiver to back of magazine band/hanger.
Thanks

navc130

I get exactly 11 inches to the start of the dovetail cut. 11 1/16 inches to the bottom of the tapered ring. Model 12 with round barrel.
11 1/2 in. to center of dovetail cut. Barrel 21 3/16 in. from receiver. Magazine tube: 14 13/16 in. overall, brass tube 13 1/8 in.,
cap 19/32, plunger 9/16 extending from tube.

gnprts

Thank you for sending Remington 12 measurement.. If it is not too much to ask will you measure the complete over all length including knob and follower of your magazine tube.

pip5255

there are different length mag tubes

gnprts

Yes it appears at least two, maybe more. I am trying to determine if the two lengths will interchange. What I have found on the round barrel model is that the magazine band is placed on the barrel about one inch difference. Thanks quote:Originally posted by pip5255
there are different length mag tubes

pip5255

this link will show you a few lengths.
http://cfnparts.com/index.php?route=product/category&path=123

gnprts

Thanks for the link which answered my question. My rifle is a model A
quote:Originally posted by pip5255
this link will show you a few lengths.
http://cfnparts.com/index.php?route=product/category&path=123