In order to participate in the GunBroker Member forums, you must be logged in with your GunBroker.com account. Click the sign-in button at the top right of the forums page to get connected.

Rock Island 1911 Trigger

PistolNutPistolNut Member Posts: 73 ✭✭
edited October 2009 in Ask the Experts
Installed a drop in Wilson trigger in my Rock Island 1911 Tactical. The Wilson trigger fits really loose. Lots of up and down play.
Any suggestions on an aftermarket adjustable trigger with a better fit?
· Share on FacebookShare on Twitter

Comments

  • perry shooterperry shooter Member Posts: 17,105 ✭✭✭
    edited November -1
    Hello Be aware that if the machining on your Rock Island is out of spec. "sometimes this is a know Quality Control problem" then you will have a hard time finding any DROP IN parts that fit I suggest you look at Brownell's and also call there Tech department. Most match grade guns have made the use of OVERSIZE parts that were then FITTED to the frame being used that is What makes them a MATCH grade gun. IMHO DROP IN parts just don't cut it unless you are very very lucky.
    · Share on FacebookShare on Twitter
  • dcs shootersdcs shooters Member Posts: 10,870 ✭✭✭
    edited November -1
    +1 on what perry said. If a Wilson trigger is such a loose fit, your frame is way out of spec. Call Brownells as said and ask for a over size trigger that needs fitting.
    · Share on FacebookShare on Twitter
Sign In or Register to comment.