In order to participate in the GunBroker Member forums, you must be logged in with your GunBroker.com account. Click the sign-in button at the top right of the forums page to get connected.
Options

Winchester Model 88

gunpirategunpirate Member Posts: 75 ✭✭
edited November 2017 in Ask the Experts
I have a winchester model 88 serial number 8888, in a .308. It has two mags and is in great shape. It was mfg in 1955. Any I idea what it's worth?
· Share on FacebookShare on Twitter

Comments

  • Options
    gunpirategunpirate Member Posts: 75 ✭✭
    edited November -1
    I have a Winchester model 88 .308 serial #39xxx (1956) in excallent shape. Any idea what I should ask for it?
    · Share on FacebookShare on Twitter
  • Options
    gunpirategunpirate Member Posts: 75 ✭✭
    edited November -1
    I have a model 88 that was worked on by a "smithy" that does not feel like it was put back together correctly. The lever seems to over-extend. Looking for a gunsmith that KNOWS the 88.
    I want to have this rifle looked at/repaired and what can be done to help the trigger. Would like to have a 88 re-barreled to perhaps .338 Federal or .358 as the originals start out at >$2500.
    Not worried about collector value, just want a slick and slim big bore lever gun for moose or caribou with no external hammer. I think an average weight 20" 338/358 tube on a 88 would be perfect. Just need a knowlegable gunsmith to do it. Anyone know of a gunsmith who know the quirks of the 88 and the capability to change barrels?
    · Share on FacebookShare on Twitter
  • Options
    gunpirategunpirate Member Posts: 75 ✭✭
    edited November -1
    Anyone know a good gunsmith that works on Winchester model 88, Problem wont feed bullet out of magazine with out jaming
    · Share on FacebookShare on Twitter
  • Options
    gunpirategunpirate Member Posts: 75 ✭✭
    edited November -1
    Guys,

    I am thinking of selling my 1961 winchester Rifle Model 88 Cal 358 with a Bausch and Lomb Balvar 4 2.5X-4X power scope. The gun is in good condition but I do not have the clip.

    Do you think I would be able to draw some interested buyers for this gun?

    I look forward to your response.

    Thank you,
    AJ
    · Share on FacebookShare on Twitter
  • Options
    gunpirategunpirate Member Posts: 75 ✭✭
    edited November -1
    I have a winchester model 88 308. It is a lever action. It is stamped with the number 6784 so it was in the first bunch produced in 1955 I believe. Does anyone have an idea of the value? It is in good condition.
    · Share on FacebookShare on Twitter
  • Options
    gunpirategunpirate Member Posts: 75 ✭✭
    edited November -1
    mine is cracked where the clip inserts.
    thanks
    john
    · Share on FacebookShare on Twitter
  • Options
    gunpirategunpirate Member Posts: 75 ✭✭
    edited November -1
    Need clip for 358 Win., none available can I use 308 clip as replacement?
    · Share on FacebookShare on Twitter
  • Options
    gunpirategunpirate Member Posts: 75 ✭✭
    edited November -1
    I recently inherited a Winchester 308 model 88 from my father-in-law. We sometimes hunted together and this gun was his pride and joy and now I'm beginning to learn why. I have no intention of selling it but from what learned so far it may be more valuable than I realized. It is in very good if not excellent condition, serial # 16558. I was hoping someone could give a ballpark value of it. Thanks.
    · Share on FacebookShare on Twitter
  • Options
    gunpirategunpirate Member Posts: 75 ✭✭
    edited November -1
    Found this site ([8D]) while researching my Dad's .308 model 88 winchester rifle. According to info I found the gun was manufactured in 1955. I have a hunting rifle and do not have a need for 2. I am curious in the value of the model 88. Can anyone give me a idea. It is in very good condition, the stock has been refinished, all stamping are visible, the barrel has little if any surface rust, the bore is clean, 2 mag clips, lever action works smooth.
    · Share on FacebookShare on Twitter
  • Options
    gunpirategunpirate Member Posts: 75 ✭✭
    edited November -1
    Could this be a true story ? A post '64 stock with pre '64 metal ?
    That would be a two year difference. I have an idea what happened,what is your take on this ? GB # 45026390
    · Share on FacebookShare on Twitter
  • Options
    gunpirategunpirate Member Posts: 75 ✭✭
    edited November -1
    I just got a model 88. It's serial number 8888 in a .308 caliber. It's about 95%. It shoots good no pitting and is very smooth. Any idea what it's worth? Thanks.
    · Share on FacebookShare on Twitter
  • Options
    gunpirategunpirate Member Posts: 75 ✭✭
    edited November -1
    Does any one know where I can find A wood stock for A Winchester Model 88 - 308?????????
    · Share on FacebookShare on Twitter
  • Options
    gunpirategunpirate Member Posts: 75 ✭✭
    edited November -1
    I have a post 64 model 88 284 carbine.and i have found some parts i need.but they came off a pre 64 rifle..the parts are
    front sight hood
    rear sight
    pg cap
    butt plate....what i need to know is if these would still be the correct parts?Thanks
    · Share on FacebookShare on Twitter
  • Options
    gunpirategunpirate Member Posts: 75 ✭✭
    edited November -1
    I have a Mod 88 Rifle pre 64 and I am confused as to value. There is or was one listed on GunBroker as rare 63 and asking over $1800.I asked him what made it so rare and was told it was the Checkering.If it was Cut or Impressed and if it was on the bottom of Forearm or Not. Mine has Cut Checkering with none on the bottom of Forearm. Any Help? Thanks Ron
    · Share on FacebookShare on Twitter
  • Options
    gunpirategunpirate Member Posts: 75 ✭✭
    edited November -1
    I think i know the answer to this but wana make sure..ive got a chance to buy a model 88 made in 1968 it is unfired and looks it..it 100% like new.he has all the paper work but no box.for 750.00..yall think thats a deal?
    · Share on FacebookShare on Twitter
  • Options
    gunpirategunpirate Member Posts: 75 ✭✭
    edited November -1
    I just came into the posession of a Winchester model 88 and would like to mount a scope.
    Being as this is an old make, I need advice.
    I want a "see through" scope so do I use a Weaver mount or just but scope mounts that secure to the rifle itself and are high enough to see through?
    A bit new at this.
    thanks
    · Share on FacebookShare on Twitter
  • Options
    gunpirategunpirate Member Posts: 75 ✭✭
    edited November -1
    Guys need you help i have a model 88 winchester #225172A how much is it worth i see some going for 1200.00.How do i find out what it is worth it was given to me from a family member that past on
    · Share on FacebookShare on Twitter
  • Options
    MIKE WISKEYMIKE WISKEY Member, Moderator Posts: 9,976 ******
    edited November -1
    short answer.... yes (may need a little 'fitting')
    · Share on FacebookShare on Twitter
  • Options
    gunpirategunpirate Member Posts: 75 ✭✭
    edited November -1
    Thanks for your help
    · Share on FacebookShare on Twitter
Sign In or Register to comment.