In order to participate in the GunBroker Member forums, you must be logged in with your GunBroker.com account. Click the sign-in button at the top right of the forums page to get connected.
Ruger SR 556 Flash Hider
armilite
Member Posts: 35,490 ✭✭✭
What's the best way to remove it without phuckin it up. There's no flats to grab on with a wrench and I don't want to try the big screw driver between the slots.
Comments
What's the best way to remove it without phuckin it up. There's no flats to grab on with a wrench and I don't want to try the big screw driver between the slots.
The screwdriver through slots ends up creasing the flats, good to avoid.
Not sure of the size, but an Allen screwdriver inserted "male to female" will turn it out.
The spade bit is a nice thought based on the shape. Staying out of the crown would be a good decision though.
I use a strap wrench when an actual steel tool isn't available.
https://www.harborfreight.com/2-pc-rubber-strap-wrench-set-69373.html
These have a rubber strap which will grip a little better but there are cloth straps also.
Best.