Reloading data for 300 ultra mag

kevin@digital-link.net

I have a rem 700 300 ultra mag (not the short mag) and would like a good load for deer at ranges up to about 200 yards I will be hunting in a fairly open wood lot along corn fields I need a good bullet and powder combination I was using 165 nosler ballist tip and 90 grs. IMR7828 powder Thanks Kevin

kevin@digital-link.net

---

I purchased a rem 700 in the 300 ultra mag and would like some data on reloads I will be hunting whitetail in pa woods and open fields any info will be helpful I would like to use IMR powder if possible So far I have the gun for almost a year and only fired 7 factory rounds I want to get some shooting before hunting season Thanks Kevin

kevin@digital-link.net

I purchased a rem 700 in the 300 ultra mag and would like some data on reloads I will be hunting whitetail in pa woods and open fields any info will be helpful I would like to use IMR powder if possible So far I have the gun for almost a year and only fired 7 factory rounds I want to get some shooting before hunting season Thanks Kevin

DaRoosta

I don't have reloading data, but let me know if you want some once-fired brass. I shot 3 or 4 boxes of Remington 300-UltraMag that I still have the brass for. I won't be reloading for it.

---

JWhite2399@cs.com

will270win

Check out Nosler's sight. They have data on all the new Remingtons.

---

When it absolutely, positively,has to be destroyed overnight.....U.S. MARINES. will270win@aol.com ~Secret Select Society Of Suave Stylish Smoking Jackets~

kevin@digital-link.net

I went to nosler and could not find anything where do you look? Thanks kevin

drawn

Here's some Alliant loads http://recipes.alliantpowder.com/rg.taf?_function=centerfire&step=1

kevin@digital-link.net

I found a load with Imr but still looking for a few more this was the one I found 90 grains of 7828 pushes a 165 grain 3300 That was the max load any more info would be helpful Thanks Kevin