In order to participate in the GunBroker Member forums, you must be logged in with your GunBroker.com account. Click the sign-in button at the top right of the forums page to get connected.

IS Reloader 7 ythe same as RX7??

modocmodoc Member Posts: 474 ✭✭✭
edited November 2001 in Ask the Experts
I bought some Alliant powder Reloader 7 and the Lyman CAST BULLET HANDBOOK calls for certain loads of Rx7.Have you experience with this? Are the two of them the same???

Comments

  • kimberkidkimberkid Member Posts: 8,858 ✭✭✭
    edited November -1
    I thought the RX7 was a Mazda! lol BTT
    GUN CONTROL: If you're not outraged, you're not paying attention!kimberkid@gunbroker.zzn.com
    If you really desire something, you'll find a way ?
    ? otherwise, you'll find an excuse.
  • oneshyoneshy Member Posts: 417
    edited November -1
    I don't have experience with them, but I doubt it. Go to your supplier, and he should have reloading charts for each manufacturer that usually lists all their individual powders, and what calibers they are made for.
  • Ronald J. SnowRonald J. Snow Member Posts: 1,346 ✭✭✭✭✭
    edited November -1
    In your Lyman manual you will find a powder classification chart (page 64, 47th edition). RX7 is Alliant Reloader 7; all their Reloader series are referred to this way. Remember, Lyman has no ax to grind regarding reloading components and as a rule their data is reliable with a wide variety of components. Should you have any questions regarding Lyman data or products call their 1-800-22-LYMAN toll free number.
  • modocmodoc Member Posts: 474 ✭✭✭
    edited November -1
    Thank you Mr.Snow for the knowledgable answer.A fine gentleman with information to share.I would suggest to others that when someone asks for an expert opinion,those with nothing to contribute should keep it to themselves. The old adage about not knowing who is a fool until he opens his mouth,applies here as well as verbally.Oneshy,thank you for the sound advice also.modoc---keep your powder dry,but not hot.[This message has been edited by modoc (edited 11-20-2001).]
Sign In or Register to comment.