In order to participate in the GunBroker Member forums, you must be logged in with your GunBroker.com account. Click the sign-in button at the top right of the forums page to get connected.

Nambu 8mm (small trigger guard)

HAIRYHAIRY Member Posts: 23,606
edited November 2001 in Ask the Experts
Help!! I've disassembled the weapon and since I wanted to blue the gun, removed the safety. Now, for whatever reason, the safety won't go back in! It fits into the slot okay, aligns up okay, but just won't return to the position. My book says don't use force as the saftey might break. Suggestions anyone??
· Share on FacebookShare on Twitter

Comments

  • Der GebirgsjagerDer Gebirgsjager Member Posts: 1,673 ✭✭
    edited November -1
    Nambus are always kind of a pain to reassemble. All I can tell you is to do it incrementally. Install the safety in the main frame and make sure it rotates properly, then put the trigger guard assembly on the main frame and make sure that it still rotates and blocks the trigger, returns, and has no interference from the sear. Perhaps the trigger bar isn't installed properly. If this is all working properly at that stage, then take the trigger guard group off again and install the barrel/bolt group, then put the trigger guard group back on and it should work.
    · Share on FacebookShare on Twitter
  • HAIRYHAIRY Member Posts: 23,606
    edited November -1
    Thanks for the advice. I'll try agin!
    · Share on FacebookShare on Twitter
Sign In or Register to comment.