In order to participate in the GunBroker Member forums, you must be logged in with your GunBroker.com account. Click the sign-in button at the top right of the forums page to get connected.

KINGJOEY SKS TRIGGER GROUP

JEEROME589JEEROME589 Member Posts: 44 ✭✭
edited November 2003 in Ask the Experts
I HAVE AN SKS-M. CAN'T GET A DRUM TO FIT. I WOULD LIKE TO KNOW WHERE I COULD GET A TRIGGER GROUP, LIKE THE ONE IN THE PICTURE. ANY HELP WOULD BE APPRECIATED, THANKS WAYNE.

IF IT AIN'T BROKE DON'T FIX IT!

Comments

  • kingjoeykingjoey Member Posts: 8,636
    edited November -1
    If you have an SKS-M it should have the triggergroup and receiver setup for AK mags already. You are likely having a problem with your stock not allowing the drum to fit. I had to take a Dremel and a sanding drum (1/2" dia) and carefully contour (read: grind the hell out of) the stock in the area around the magwell. If you do it well the drum will fit in there nice and the stock won't sit on the top of the drum. If you have the factory stock on it then you have a steel magwell liner to contend with. Considering how relatively rare that stock is, I'd get a aftermarket stock of some sort to use. It doesnt show clearly in the pic, but the drum is actually a little recessed into the belly of the stock. Your contour cut should match the profile of the top of the drum more or less. If you aren't sure how to tackle this, I can do it for you, just send me whatever stock you want to use and I'll cut it for drum use on the SKS-M (I've had to do a few[;)]). It's not hard to do, but it is easy to botch up.[:D]

    fc7245fc.jpg



    Love them Beavers
    orst-title-1.gif

    SUPPORT THE I.N.S. , THE COUNTRY THEY SAVE COULD BE YOUR OWN
  • JEEROME589JEEROME589 Member Posts: 44 ✭✭
    edited November -1
    THANKS FOR THE ADVICE, I NEEDED TO HEAR FROM SOMEONE WHO HAD 'BEEN THERE, DONE THAT' SOUNDS GOOD I"LL TRY IT THANKS, AGAIN. WAYNE

    IF IT AIN'T BROKE DON'T FIX IT!
Sign In or Register to comment.