In order to participate in the GunBroker Member forums, you must be logged in with your GunBroker.com account. Click the sign-in button at the top right of the forums page to get connected.

REM M1100

poopahpoopah Member Posts: 54 ✭✭
edited February 2002 in Ask the Experts
Gentlemen,Need to know if 3in bbl will fit and operate on 23/4 receiver(with 23/4 ammo).I would appreciate some wisdom on this.Thanks,Roger
· Share on FacebookShare on Twitter

Comments

  • MIKE WISKEYMIKE WISKEY Member Posts: 10,043 ✭✭✭✭
    edited November -1
    yes a 3" barrel will fit on a 2 3/4" receiver and will function with 2 3/4" high brass ammo or 3" ammo (rem. doesn't recommend this). target loads might not function properly as the 3" barrel only has one gas port (2 3/4" barrels have two).
    · Share on FacebookShare on Twitter
  • raskilraskil Member Posts: 250 ✭✭✭
    edited November -1
    Before you buy a 3" barrel, consider having the forcing cone of your 2 3/4 barrel opened to handle 3" shells. Then you will be able to shoot 3" steel shot (NOT LEAD!!!). This is basicly what Remington has done for their "steel barrel". The lower pressure of steel loads will allow for the use of 3" steel in a 2 3/4 chamber. This can not be done on an 870 2 3/4 due to the extractor position not allowing proper distance to kick the empty hull out when cycled. *(Remington will not authorise modifications made to factory barrels).
    · Share on FacebookShare on Twitter
  • poopahpoopah Member Posts: 54 ✭✭
    edited November -1
    Thank You Gentlemen,This is what I needed to know.Roger
    · Share on FacebookShare on Twitter
Sign In or Register to comment.