In order to participate in the GunBroker Member forums, you must be logged in with your GunBroker.com account. Click the sign-in button at the top right of the forums page to get connected.

7mm neck sizing

72chevelle

72chevelle Member Posts: 36 ✭✭

April 2002 edited April 2002 in Ask the Experts

I am in the process of making 7mm tcu and 7-30 waters brass. I have used 223 and 30/30 brass to start. First loading went great. When I tried neck sizing the same brass again the necks were not sized small enough to hold the bullet. Any suggestions? Thanks.

0 ·

Comments

aby80 Member Posts: 245 ✭✭✭

April 2002 edited November -1

Check the diameter of the expander button of your neck sizing die and see if it is the right size.

0 · Share on Facebook Share on Twitter

Sign In or Register to comment.