In order to participate in the GunBroker Member forums, you must be logged in with your GunBroker.com account. Click the sign-in button at the top right of the forums page to get connected.

Trigger Return Springs

webleywebley Member Posts: 154 ✭✭✭
edited May 2002 in Ask the Experts
Any body out there know of a webbsite,book or how much trouble replacing the spring on these old H+R, Iver revolver types? I have about 8 real nice ones that need the springs so I should learn how to do it.
· Share on FacebookShare on Twitter

Comments

  • leeblackmanleeblackman Member Posts: 5,303 ✭✭
    edited November -1
    I don't know of any books, I really wish I did. The only thing I could think of is to get hold of a gunsmithing book that shows various DA revolvers, and maybe you could find an illustration like in Numrich parts co catalog that shows it dissasembled. As far as the trigger return springs, unless numrich has any, you might have to get hold of some parts guns and take the springs out of them.

    Good luck, and if you find any books I'd really appreciate it if you'd tell me.

    Visit me http://www.geocities.com/gunsmithlee
    · Share on FacebookShare on Twitter
  • v35v35 Member Posts: 12,710 ✭✭✭
    edited November -1
    Drive out the two triggerguard pins and the triggerguard will come out. The trigger return spring is a small (about 1/2") V spring that is captured between the triggerguard and a recess in the front of the trigger. Try Gunparts or Brownells.
    Since there are different variations of the spring you may have to grind to suit. Keep the originals to identify or copy .
    · Share on FacebookShare on Twitter
Sign In or Register to comment.