In order to participate in the GunBroker Member forums, you must be logged in with your GunBroker.com account. Click the sign-in button at the top right of the forums page to get connected.
9mm ar conversion questions
jeffb1911
Member Posts: 2,113 ✭✭✭
Picked up a 9mm ar barrel and a drop in mag block. What other parts do i need in 9mm to do a complete conversion? Can i get by with just a 9mm bolt? Or would i need a special hammer, spring, ejection port cover etc? Not sure if a normal upper would work or if it would have to be a 9mm upper. Anyone know for sure or where i can find all the answers?
REPLY:
Yes, all i got was the barrel. Figured an upper would be needed, but do i need the 9mm upper or will a 223 upper work? Also, have a supply of Colt 9mm pre ban mags from a long time ago, so the mag issue should be ok. But the 9mm takes a different mainspring? What about buffer?
REPLY:
Yes, all i got was the barrel. Figured an upper would be needed, but do i need the 9mm upper or will a 223 upper work? Also, have a supply of Colt 9mm pre ban mags from a long time ago, so the mag issue should be ok. But the 9mm takes a different mainspring? What about buffer?
Comments
When you say you picked up a barrel, do you mean a barreled upper, or just a barrel? If it is just a barrel, you will ne an upper reciever, with all the trimmings, including , but not limited to G0/NO-GO gauges, for head spacing.
Best
EDIT
The Bare uppers, are pretty much the same, aside from the A2/A3 styles....flattop or regular A2 carry handle.
http://www.biggerhammer.net/ar15/hammers/
On the plus side since it's a straight blowback, there are no gas tubes.
Check and double check any advice you receive here!
Find someone who has actually built one that runs.