In order to participate in the GunBroker Member forums, you must be logged in with your GunBroker.com account. Click the sign-in button at the top right of the forums page to get connected.
Gambler's Cane
stj
Member Posts: 7 ✭✭
Gambler's Cane (firearm) possibly a .32 cal - not for sure on this.
The firing mechanism is hidden inside the first 12"of the cane (from the top) and is secured by two small screws, one each on the opposite side of the diameter. The joint between the 3rd and 4th sections of the bamboo (from the top cane) is where the loading chamber and cocking of the firearm takes place by making a ? of a turn and pulling out 2". The ammunition is discharged out of the top of the cane. The cane does not have the appearance of a firearm.
This cane is made of dark bamboo and has a glossy finish, which appears original. The top and the tip of the cane appear to be a coated metal. It resembles pewter with a gold or brass coating. The tip is secured by two brads, one each on the opposite side of diameter and the top is secured as part of the firing mechanism.
The dimensions are 34" long in normal position and 36" long when firing chamber is exposed. It is approx. an inch across the top and _" of an inch at the tip. It is slightly tapered from top to bottom.
At the top of the cane - "-BROVOLO S.O.D.O. PATEIIT-" (I believe the "II" between E & T might be a N.)
If anyone has any information on the worth of this item or any information that would identify it's manufacturer, would be greatly appreciated. Thanks, stj
The firing mechanism is hidden inside the first 12"of the cane (from the top) and is secured by two small screws, one each on the opposite side of the diameter. The joint between the 3rd and 4th sections of the bamboo (from the top cane) is where the loading chamber and cocking of the firearm takes place by making a ? of a turn and pulling out 2". The ammunition is discharged out of the top of the cane. The cane does not have the appearance of a firearm.
This cane is made of dark bamboo and has a glossy finish, which appears original. The top and the tip of the cane appear to be a coated metal. It resembles pewter with a gold or brass coating. The tip is secured by two brads, one each on the opposite side of diameter and the top is secured as part of the firing mechanism.
The dimensions are 34" long in normal position and 36" long when firing chamber is exposed. It is approx. an inch across the top and _" of an inch at the tip. It is slightly tapered from top to bottom.
At the top of the cane - "-BROVOLO S.O.D.O. PATEIIT-" (I believe the "II" between E & T might be a N.)
If anyone has any information on the worth of this item or any information that would identify it's manufacturer, would be greatly appreciated. Thanks, stj
Comments
Best Check with BATF in your area...Value Wise if its a Legally Registered Cane Gun would be around $500.00 Plus the Transfer Stamp... As for the maker of your Cane Gun, I have No Idea...There were many Makers both here in the USA and in Europe, and without knowing if there are proof marks that could give a Hint as to country of manufacture you'll just have to wait and see if someone on the FORUM recognizes the Manufacturers name...Best...
Captain Kirk, Tech Staff
LR