In order to participate in the GunBroker Member forums, you must be logged in with your GunBroker.com account. Click the sign-in button at the top right of the forums page to get connected.

Reloading

sf340flyersf340flyer Member Posts: 127 ✭✭✭
edited January 2002 in Ask the Experts
I just started reloading last night. I bought the lee anniversary kit and the problem i have is when i seat the round i seat it in too far. i dont know when to stop applying pressure to the lever. Can anyone help me out. BTW i'm reloading 45 acp
· Share on FacebookShare on Twitter

Comments

  • sf340flyersf340flyer Member Posts: 127 ✭✭✭
    edited November -1
    I have never reloaded, but am interested in doing so. I was given a RCBS Green Machine that has .357 dies in it. I have read a little about this machine and am confused. Is this machine set for only that caliber and can't be changed. If so is it worth anything if I sell it to get other reloader?

    Thanks,
    · Share on FacebookShare on Twitter
  • sf340flyersf340flyer Member Posts: 127 ✭✭✭
    edited November -1
    Can any of the experts recommend a good reloading setup for a reasonable amount of money? Best equipment for the buck, so to speak I'd like to reload mostly handgun ammunition.. ie: .45 long colt and ACP, and .30 Carbine.

    Thanks in advance...
    · Share on FacebookShare on Twitter
  • sf340flyersf340flyer Member Posts: 127 ✭✭✭
    edited November -1
    Best reloading equipment to buy? For rifles and pistols. What do I need to get started.
    · Share on FacebookShare on Twitter
  • sf340flyersf340flyer Member Posts: 127 ✭✭✭
    edited November -1
    I think I have made the decision to get on the reloading band wagon. I'm looking for someone in the nor cal---east of Sacramento area as a tutor. From walking me through the purchase of a dependable set up to educating me on the first run. I have lots of brass--38, 9mm 40, 45, 44, 223 243 308 and soon--44.40. I'm a tactile learner so hands on with a mentor is far more effective to me as opposed to just buying equipment and reading a book. Plus---meeting new people.

    Thanks
    Bret
    · Share on FacebookShare on Twitter
  • sf340flyersf340flyer Member Posts: 127 ✭✭✭
    edited November -1
    hi again, i was just wondering what the proper reloading kit would be to a begginer at reloading? maybe someting strong but affordable

    thanks again


    andrew

    one shot, one kill
    · Share on FacebookShare on Twitter
  • sf340flyersf340flyer Member Posts: 127 ✭✭✭
    edited November -1
    with all the ammo disappearing these days, I have made the decision to load my own. I have 9mm and .45 in hand gun calibers and am just looking to start with those for now. I found a Lee Pro 1000 (progressive type press) pretty cheap. Just need some advice on what else is needed. i.e... dies and such. Thanks!
    · Share on FacebookShare on Twitter
  • sf340flyersf340flyer Member Posts: 127 ✭✭✭
    edited November -1
    Does anyone know where I can get Norma MRP powder?
    · Share on FacebookShare on Twitter
  • sf340flyersf340flyer Member Posts: 127 ✭✭✭
    edited November -1
    Does anyone know where I can get Norma MRP powder?
    · Share on FacebookShare on Twitter
  • sf340flyersf340flyer Member Posts: 127 ✭✭✭
    edited November -1
    I'm considering reloading as an option to putting up with the high cost of ammo everywhere. I would like to start off with the least expensive re loader I can find that I guess would be a LEE-LOADER single stage press,I think. I want to load two calibers 308 Winchester and 45acp can someone please tell me about how much could I expect to spend on this start up venture,any help in this area would be much appreciated. Thanking you all in advance. tavarish
    · Share on FacebookShare on Twitter
  • sf340flyersf340flyer Member Posts: 127 ✭✭✭
    edited November -1
    if you go with lee buy their dies as the powder measure requiers a "expand the case mouth die" to work.IMG_0956.jpg
    · Share on FacebookShare on Twitter
  • sf340flyersf340flyer Member Posts: 127 ✭✭✭
    edited November -1
    Im looking to start loading my own bullets. Does anybody have any suggestions on machines, or a website that I can take a look at them?

    Any help would be much appreciated.

    - Parisi
    · Share on FacebookShare on Twitter
  • sf340flyersf340flyer Member Posts: 127 ✭✭✭
    edited November -1
    Hello,
    My son just gave me a pair of handguns both ruger blackhawks. One is chambered in 30-357 mag the other is 32-357 mag. Does anyone have any data on either one. I have been able to find loading dies and forming dies for the 30-357. nothing more than that. NEED HELP.
    Thank you
    Lloyd
    · Share on FacebookShare on Twitter
  • sf340flyersf340flyer Member Posts: 127 ✭✭✭
    edited November -1
    Thinking of getting into reloading and was wondering what it would entail. What reloading manual would you suggest ?
    · Share on FacebookShare on Twitter
  • sf340flyersf340flyer Member Posts: 127 ✭✭✭
    edited November -1
    looking for loads for a 25-35 using 100gr. bullets. can not find anything in my old manuals. thanks. e-mail. lpede@infionline.net
    · Share on FacebookShare on Twitter
  • sf340flyersf340flyer Member Posts: 127 ✭✭✭
    edited November -1
    What type of dies will interchange with an RCBS Press? Or will any ?
    · Share on FacebookShare on Twitter
  • sf340flyersf340flyer Member Posts: 127 ✭✭✭
    edited November -1
    I've been shooting for 20+ years but never have tried reloading. I am looking for advise about which type of equipment you recommend for a new reloader (I'll be starting off with 40 S&W). I would also appreciate a list of "need to have", and "nice to have" equipment. I've been doing a lot of reading and am leaning towards the Lee PRO 1000 progressive. Any thoughts?
    · Share on FacebookShare on Twitter
  • sf340flyersf340flyer Member Posts: 127 ✭✭✭
    edited November -1
    does the ring on the bullet set the refrence point for seating or should not pay any attention to it? i am loading a 325 wsm and the coal is 2.860 when seating the hornady 150 grain sp bullet to set at length it is below the ring. 2.820 is in the ring. so do i make them short or seat below the ring for the correct length? having the same problem with seating my 270 wsm. seat to the ring is way below the coal. any info will be appreciated. thanks
    · Share on FacebookShare on Twitter
  • sf340flyersf340flyer Member Posts: 127 ✭✭✭
    edited November -1
    I have some 7.5, 8's & #9 shot. Can I mix all these together to reload some AA's without any ill effects on patter,or reloader??? Thanks Tom.
    · Share on FacebookShare on Twitter
  • sf340flyersf340flyer Member Posts: 127 ✭✭✭
    edited November -1
    I'm shopping around for a complete reloading kit. The calibers i'm gonna reload are 270 win, 7mm-08, 40 smith, 44 mag, and 45 acp. any help in suggesting a press that has the option of both rifle and pistol die capability and any other suggestions would be greatly appreciated.
    · Share on FacebookShare on Twitter
  • sf340flyersf340flyer Member Posts: 127 ✭✭✭
    edited November -1
    What's the best and fairly enexpensive way to get started reloading? It would most likely be one caliber: .45 ACP.-Marcus
    · Share on FacebookShare on Twitter
  • sf340flyersf340flyer Member Posts: 127 ✭✭✭
    edited November -1
    I realize this question is almost like asking what the best caliber is for hunting, but here goes: What would the average person need to get set up for reloading? I am looking for a hobby that would actually reduce the expense of my other hobbies. I need to know what to get to start out loading .45acp, .40s&w, .30/.30, and 30.06. I am really not concerned about shotgun shells. I appreciate any advise!
    · Share on FacebookShare on Twitter
  • sf340flyersf340flyer Member Posts: 127 ✭✭✭
    edited November -1
    cant find any 357 brass---can you load 38 special brass up to 357 specs ?
    · Share on FacebookShare on Twitter
  • sf340flyersf340flyer Member Posts: 127 ✭✭✭
    edited November -1
    I have over 3,000 empty shell casings. About 2,000 of them are once fired factories. The rest were all reloaded at least once some twice. I have been told that they should not be reloaded more than once. Is this true? Or how many times can a caseing be used?
    · Share on FacebookShare on Twitter
  • sf340flyersf340flyer Member Posts: 127 ✭✭✭
    edited November -1
    what are the pro and cons of neck sizing to fl ?
    · Share on FacebookShare on Twitter
  • sf340flyersf340flyer Member Posts: 127 ✭✭✭
    edited November -1
    I am new to reloading. I have 100's of fired 30-06 brass. How hard would it be to cut them down to .308. I just bought a .308 and haven't done enough shootin yet.
    · Share on FacebookShare on Twitter
  • sf340flyersf340flyer Member Posts: 127 ✭✭✭
    edited November -1
    Ok, here's the deal. I've never reloaded or known anybody that reloaded. Now that I've bought an SKS I'd love to start reloading for it and my CZ 40P, and I have no idea where to start.
    My questions are these...
    1.) Is it worth it to reload 7.62x39 rounds? What about 40 S&W?

    2.) What do I need to start, best value reloader, etc???

    3.) What literature do you recommend???

    4.) open to comments.......

    Better to carry a pistol and not need it than need a pistol and not have it.
    · Share on FacebookShare on Twitter
  • sf340flyersf340flyer Member Posts: 127 ✭✭✭
    edited November -1
    I have reloaded for my 270 for the past 25 yrs.Always used 150 and 130 hornadys.Have worked up loads for each that shoot to same point so there is no resighting when going from elk to whitetails.My brother has started shooting barnes x bullets and says the hornadys are old news and I was wondering if they are that great to be worth the effort of developing a new load.I think not but would like some expert input
    · Share on FacebookShare on Twitter
  • sf340flyersf340flyer Member Posts: 127 ✭✭✭
    edited November -1
    Where is the best and cheapest place online to order reloading components and accessories. Any help would be helpful.Besides www.midwayusa.com Thanks
    · Share on FacebookShare on Twitter
  • sf340flyersf340flyer Member Posts: 127 ✭✭✭
    edited November -1
    Hey guy's, first off I would like to thank everyone for all the advice and comments you have made regarding my questions. I would like to get into reloading and recently saw an item on GB. The # is
    14479963. Is this a good purchase or are there better deals with dies out there. I dont know a damn thing about it so give me everything you've got.

    Thanks

    Larry
    · Share on FacebookShare on Twitter
  • jonkjonk Member Posts: 10,121
    edited November -1
    This topic seems to pop up every few weeks here and if you want a whole lot of info check the back log postings. For pistols, a progressive press is definately the way to go, but for a beginner I would still recommend a single stage press.I personally love Lee's stuff, but others here will tell you horror stories.Needs include a press, a priming tool, some sort of way of measuring powder- a trickler/scale, dispenser, or even dippers, dies in the calibers you need, case lube if you use steel dies, or for any if you ever reload a bottlenecked cartridge, reloading tray, primer pocket cleaner, powder funnel, and a reloading manual.Nice stuff to have includes a caliper (high quality, preferably digital), micrometer (ditto), case tumbler, all of the powder handling equipment mentioned above, bullet casting equipment (saves a lot of money over buying bullets), case trimmer (essential for rifle cartridges), and oh a bout a billion other doodads you can add on. Of course you also need primers and powder.
    "...hit your enemy in the belly, and kick him when he is down, and boil his prisoners in oil- if you take any- and torture his women and children. Then people will keep clear of you..." -Admiral of the Fleet Lord Fisher, speaking at the Hague Peace Conference in 1899.
    · Share on FacebookShare on Twitter
  • v35v35 Member Posts: 12,710 ✭✭✭
    edited November -1
    I think it depends on your budget, the amount of shooting you want to do, the amount of time you can devote to handloading and the number of calibers you will load for.
    · Share on FacebookShare on Twitter
  • badboybobbadboybob Member Posts: 1,658 ✭✭✭✭✭
    edited November -1
    I use a Lee Anniversary press kit with Lee carbide speed dies for all my handgun reloading. I load about 5,000 rounds a year with it, but being retired I have plenty of time. Add a tumbler and it is an inexpensive way to get started.I have also used RCBS with complete satisfaction.If you have a friend who reloads ask him to give you some hands on training. Otherwise get a good reloading manual and study, study.......
    · Share on FacebookShare on Twitter
  • MIKE WISKEYMIKE WISKEY Member Posts: 10,035 ✭✭✭✭
    edited November -1
    I'VE BEEN RELOADING FOR 35+ YEARS AND HAVE TRIED MOST OF THE EQUIP. ON THE MARKET. BEST PROGRESIVE LOADERS BY FAR ARE THE DILLON, A LITTLE MORE MONEY BUT WELL WORTH IT. YOU BREAK IT THEY FIX IT FREE, NO QUESTIONS.
    · Share on FacebookShare on Twitter
  • IconoclastIconoclast Member Posts: 10,515 ✭✭✭
    edited November -1
    Check the past threads, as jonk indicated. FWIW, RCBS if you go single stage, Dillon if progressive. Unless you are loading a *lot* of pistol the single stage will do just fine. You also will need a case lube pad & lube.
    · Share on FacebookShare on Twitter
  • v35v35 Member Posts: 12,710 ✭✭✭
    edited November -1
    Dont forget a powder scale to calibrate your measure and verify charge weights.
    · Share on FacebookShare on Twitter
Sign In or Register to comment.