9mm handloads 100 gr plated

cjm3422

hey guys, i need load data for x-treme copper plated 100 gr for 9mm. i can find the data for 380 which is a normal weight but nothing for 9mm. I will also need the OAL if anybody has data for this round. i will be shooting it out of a glock 19. any help would be appreciated.

dcs shooters

Try the starting loads for FMJ bullets
The SFIRE might be lead as the GRS of powder is lower, of so se that data.

http://data.hodgdon.com/cartridge_load_1.asp

rufe-snow

Using standard 9mm, 115 grain data. Increase the powder load from 1/2 to 1 grain. Lighter bullets are a shorter overall length as compared to the normal 115 & 124 grain 9mm bullets. Load the 100 grainers so that the case can be taper crimped on the closests parallel surface to the forward part of the bullet.

I wouldn't sweat any loads for plated bullets, as they are meant for plinking, target practice etc.

cjm3422

ok guys, i will try some of the pointers. thanks alot for the info.

andrewsw16

Steve's Pages has lots of loads for 100gr 9mm. The plating on Xtreme bullets is so thin you can just use the same loading data as for cast bullets.

http://stevespages.com/355p_4_100.html