In order to participate in the GunBroker Member forums, you must be logged in with your GunBroker.com account. Click the sign-in button at the top right of the forums page to get connected.

Remington Model 11

hotshot18hotshot18 Member Posts: 256 ✭
edited June 2013 in Ask the Experts
I have a Rem. M11 that has a 28" cyl. bore. Is this factory?
It is a 28" solid rib barrel, and is marked CYL underneath
the barrel, right in front of the extension.
· Share on FacebookShare on Twitter

Comments

  • hotshot18hotshot18 Member Posts: 256 ✭
    edited November -1
    can anyone tell me how to find out the date and value of an old model-11 12 gauge marked military finish? serial #701645 the barrel has no #'s on the left side?
    · Share on FacebookShare on Twitter
  • hotshot18hotshot18 Member Posts: 256 ✭
    edited November -1
    Today I found one of these old shotguns & it's diffrerent from any of the others I own. On the left side upper part of the reciever it's stamped US Military Finish. The charging handle has Model 11 stamped into it. The shop owner says he will take $170.00 for it. The shotgun is 70%. $170.00 sounds high to me. Is this variant worth more than the others? Any help is appreciated.
    · Share on FacebookShare on Twitter
  • hotshot18hotshot18 Member Posts: 256 ✭
    edited November -1
    i have reningtom model 11 that when i load the mag tube and pull the bolt to load it it will let the shell come out of the mag tube about 3/4'' and lock up the action---[ i have cleaned it did not help it] any help? thanks
    · Share on FacebookShare on Twitter
  • hotshot18hotshot18 Member Posts: 256 ✭
    edited November -1
    It is a 3 barrel set with solid ribs ( 26 Ic 28 F 32 F) 75 percent blue or better. Wood has pad added and small crack in wrist. It is a 20 gauge. How much do the extra barrels help the value?

    It is easier to get forgiveness than permission.
    · Share on FacebookShare on Twitter
  • hotshot18hotshot18 Member Posts: 256 ✭
    edited November -1
    Are all model 11 barrels interchangable? I know that there is a pre-war model......and then the post war model. I thought the only difference is the safety.
    · Share on FacebookShare on Twitter
  • hotshot18hotshot18 Member Posts: 256 ✭
    edited November -1
    Was given a Remington Model 11 (I think) Ser No. 29929. The barrel is marked cyl on the left side near the receiver and has the Remington markings (Remington Arms Co) on the L/H side of the barrel. Other than this there are no other markings. Nothing on the side of the receiver or bolt. No ordinance markings on the wood or metal. It has the inside the trigger guard safety.

    There is a replacement slip-on recoil pad (now removed-no butt plate) the wood is in pretty good shape, metal is fair-light rust and patina. Easily cleaned up.

    Clues as to DOM and value???? Any leads on a replacement butt-plate? Were any of these made for other brands, thus lacking some of the standard markings?
    · Share on FacebookShare on Twitter
  • hotshot18hotshot18 Member Posts: 256 ✭
    edited November -1
    Please excuse my errors, I just joined the forum 30 minutes ago. I inherited a Remington Model 11 (not on the gun that I can find) 12ga. 30" FULL with the letters CRR on the left side barrel and SN 7352XX. I saw one similar in a gun shop about 6 months ago for $150, and yesterday I returned and its still there. So, what have I got and what good is it. I understand no steel shot, and nobody I know would lug it around a wheatfield. If it is worth <$100, I have considered cutting the barrel to 18", carving a pistol grip, and sitting up nights with the hope that somebody will kick in my front door. Any suggestions? Is it likely anyone would want it for something better? Thanks, bummy268.
    · Share on FacebookShare on Twitter
  • hotshot18hotshot18 Member Posts: 256 ✭
    edited November -1
    Does anyone know if a stock from a remington Model 11 with the safety inside the trigger guard is the same as one with the safety at the rear of the trigger guard? Are they interchangable?
    · Share on FacebookShare on Twitter
  • hotshot18hotshot18 Member Posts: 256 ✭
    edited November -1
    What parts are interchangeable between the Remington Model 11 and the Browning A5?
    · Share on FacebookShare on Twitter
  • hotshot18hotshot18 Member Posts: 256 ✭
    edited November -1
    I have a shotgun Remington Model 11 Browning Automatic. Using your previous answers I have narrowed it down to somewhere between 1922 and 1924. serial# is 352876. Pictures to follow. I am wondering what it is worth. Just a neighborhood estimate. Thanks for your help.

    http://photos-g.ak.fbcdn.net/hphotos-ak-snc3/hs133.snc3/18050_1180839890764_1521200519_30392372_1412503_n.jpg
    http://photos-c.ak.fbcdn.net/hphotos-ak-snc3/hs133.snc3/18050_1180839810762_1521200519_30392370_3016770_n.jpg
    http://hphotos-snc3.fbcdn.net/hs153.snc3/18050_1180840010767_1521200519_30392375_5406252_n.jpg
    http://hphotos-snc3.fbcdn.net/hs153.snc3/18050_1180839970766_1521200519_30392374_7188093_n.jpg
    · Share on FacebookShare on Twitter
  • hotshot18hotshot18 Member Posts: 256 ✭
    edited November -1
    I have a 20 Gauge Remington Model 11. It looks exactly like a browning a-5. The Previous Owner hacked the barrel to 19 inches. My question is I can't find a Remington model 11 barrel for it anywhere. I am looking for 24-26 inches. Will a browning a-5 barrel fit? Thanks!


    -JD
    · Share on FacebookShare on Twitter
  • hotshot18hotshot18 Member Posts: 256 ✭
    edited November -1
    I recently picked up a Model 11 , 70-80%
    but it is marked on reciever , "property of us navy"

    what doe this do to the value ?

    it has two barrels , a long one , and a short one , which one was with the gun , anyway of telling ?

    Thanks
    Ken
    · Share on FacebookShare on Twitter
  • hotshot18hotshot18 Member Posts: 256 ✭
    edited November -1
    I am trying to remove the stock on a Rem. Model 11. My manual says to remove the two bottom tang screws, and the stock should slide right off. I can get it to wiggle side to side a little, but won't budge going back. There's gotta be a trick to get this off somehow???
    Thanks for your help.
    · Share on FacebookShare on Twitter
  • hotshot18hotshot18 Member Posts: 256 ✭
    edited November -1
    I'm not too gun savy so please bare with me! I went to a pawn shop to buy a shotgun to hunt with and was shown a Remington Model 11 made in 1939. It was in pretty good shape to my untrained eye. I have since gone to the Remington website and have learned that there were several versions of this gun. I don't remember if there was any engraving on the reciever or stock checkering on the gun I saw. So my questions are: is this gun worth the $200 price? Would it ge a good general purpose gun for Turkey or possible Deer? If it breaks, is it easy to have it fixed? Thanks to all for any guidance you can offer.
    · Share on FacebookShare on Twitter
  • hotshot18hotshot18 Member Posts: 256 ✭
    edited November -1
    I recently acquired a Remington Model 11 in 12 ga. with a solid rib. The serial number on the bottom front of the receiver appears to be 774139. It's a little hard to read, so it could be D74139. I'd appreciate it if someone could translate that to the date of manufacture. Thanks.
    · Share on FacebookShare on Twitter
  • hotshot18hotshot18 Member Posts: 256 ✭
    edited November -1
    Need DOB for a Remington model 11.. 52662 thanks in advance.
    · Share on FacebookShare on Twitter
  • hotshot18hotshot18 Member Posts: 256 ✭
    edited November -1
    I have an old Remington model 11 shotgun(riot gun), there are engravings on the side of a pheasant. The forestock has a small crack on it. I was wondering how much this would be worth.
    · Share on FacebookShare on Twitter
  • hotshot18hotshot18 Member Posts: 256 ✭
    edited November -1
    I have a Remington Model 11 20 gauge that is built with a Browning patent. I have been looking for a barrel and parts for it. I am curious if Browning parts will enter change with it, and if so which model. Any information or parts would be appreciated. I have ran many many wants ads for it with no results. Thank You, Corren
    · Share on FacebookShare on Twitter
  • hotshot18hotshot18 Member Posts: 256 ✭
    edited November -1
    Anyone have an idea of the stud or pin that fits between the forend and the receiver to align the forend with the receiver?
    · Share on FacebookShare on Twitter
  • hotshot18hotshot18 Member Posts: 256 ✭
    edited November -1
    I have a Model 11 Remington marked with "Property U.S.Navy"
    that needs a barrel with the CUTTS Compensator. Is their a difference between the Model 11 and the "SPORTSMAN" barrels?
    Thanx for help..... I know squat about shotguns and want to acquire a "correct" barrel with Cutts for this WWII veteran
    Roger Curl roger_curl@msn.com
    · Share on FacebookShare on Twitter
  • v35v35 Member Posts: 12,710 ✭✭✭
    edited November -1
    The Army ones were.
    I suspect the Savage 720 barrels would also work but you'd have to try.
    · Share on FacebookShare on Twitter
  • hotshot18hotshot18 Member Posts: 256 ✭
    edited November -1
    I thought all barrels were interchangable specfic to guage. Savage barrels will work, have seen this on occassions. Does anyone know of any occassion when Remington 11 barrels did not interchange?
    · Share on FacebookShare on Twitter
  • asphalt cowboyasphalt cowboy Member Posts: 8,904 ✭✭✭✭
    edited November -1
    Yes, the 11 barrels can be interchanged.
    I've got seven 11's, and the only one I haven't switched barrels on is the unfired 11F.
    I will defer to anyone who has actually used a Savage barrel, but do know the A5 barrel is a No-Go.
    · Share on FacebookShare on Twitter
Sign In or Register to comment.