In order to participate in the GunBroker Member forums, you must be logged in with your GunBroker.com account. Click the sign-in button at the top right of the forums page to get connected.

Blackhawk Trigger Springs

KX500KX500 Member Posts: 733 ✭✭✭✭
edited June 2002 in Ask the Experts
Really like my recently acquired Ruger Blackhawk. The trigger pull could be a tad lighter though. Anyone had good luck replacing their trigger spring with one of the aftermarket springs?
· Share on FacebookShare on Twitter

Comments

  • lazywallruslazywallrus Member Posts: 119 ✭✭✭
    edited November -1
    For the cost of the spring, shipping and the time you spend doing the work, you are probably better off just taking it to a gunsmith. My BH was pulling at over 6# he took it down to 3 1/2 and it only cost 25 bucks I think the spring kit costs 40-50. I dont know if there is any other advantages from the whole spring kit compared to what I had done????......Lazy
    · Share on FacebookShare on Twitter
  • dustebuttdustebutt Member Posts: 100 ✭✭
    edited November -1
    A spring kit in Brownells is around $15.00. I know a lot of cowboy shooters that use them. Also know a lot of cowboy shooters that put around $100. into an action job.
    · Share on FacebookShare on Twitter
  • PiadeaPiadea Member Posts: 146 ✭✭✭
    edited November -1
    A bullseye or wolff spring kit will do wonders for your Ruger. Some judicious stoning of hammer sear won't hurt but be careful here.
    · Share on FacebookShare on Twitter
Sign In or Register to comment.