In order to participate in the GunBroker Member forums, you must be logged in with your GunBroker.com account. Click the sign-in button at the top right of the forums page to get connected.
Steyr GB 9mm need schematic
yotee
Member Posts: 2 ✭✭
A friend of mine took apart his GB STEYR and brought me the parts to reassemble. I found a schematic for this weapon however it only shows the left hand side. I can see how the left spring on the hammer assembly goes but not the right side spring. Does anyone know how it grabs the hammer? and does someone have or know where I can find a schematic out on the web?
Thanks,
Yotee.
Edited by - yotee on 06/11/2002 17:32:33
Thanks,
Yotee.
Edited by - yotee on 06/11/2002 17:32:33
Comments
I know of no sights on the web that show schematics of the GB. You might check the GunSouth web site, but since GS no longer imports Steyr products, I would not expect to find anything there. A schematic will not help accomplishing the difficult task of getting the sear back into place with the tension on it. While I have not tried it, perhaps the sear could be put into place with the outer legs behind it, which would mean no tension, and then use a needle nose pliers to spring the outer leg towards the inside and then forward under the lip.
If my explanation is not sufficient, I can scan the exploded view from my GB manual and e-mail it to you. If you need that done, please contact me at judgecolt45@hotmail.com and I will try to help.
Captain Kirk, Tech Staff