In order to participate in the GunBroker Member forums, you must be logged in with your GunBroker.com account. Click the sign-in button at the top right of the forums page to get connected.
Options

What do I have?

socrchiksocrchik Member Posts: 10 ✭✭
edited August 2013 in Ask the Experts
I have a spingfield 1911A1. It is chambered in 9mm and I cannot find any information on it, or another one like it! I'm looking not just for its value but general info on it and how i might find another one. It appears to be a standard model (no bell or whistles). Also its an original 9mm frame, not a conversion. Anybody have any background info on this thing? P.S. I have pictures but cant figure out how to add them to this posting.
· Share on FacebookShare on Twitter

Comments

  • Options
    socrchiksocrchik Member Posts: 10 ✭✭
    edited November -1
    Found this in a box of old items my family had and can't quite figure out what it is. No brand name but does say Germany and a serial number on it? Handle feels like plastic? Ammo that was with the gun was .22 cal longer bullet.
    Full shot:
    7h0q.th.png

    Serial number?
    kdcv.th.png
    · Share on FacebookShare on Twitter
  • Options
    socrchiksocrchik Member Posts: 10 ✭✭
    edited November -1
    I'm wanting to get a idea on the value of a gun I have here. I went over to the auction side, but couldn't find anything on it. It's a semi-auto pistol chambered in 9mm. On the box, it has "Tressitu", "TZ99", and "South Africa". Came w/ two 15 rd clips,cleaning brush, and hard case. Gave about 350 for it about 5 or so years ago. Thinking about selling it. Thanks in advance[:)]
    · Share on FacebookShare on Twitter
  • Options
    socrchiksocrchik Member Posts: 10 ✭✭
    edited November -1
    Double shot guns, Richards on side. Under barrel has several marks. One mark is 6665 another is 12 (perhaps gauge?) then also letters FG on both barrels; also a capital A. Then on each barrel two different "stamps of some symbol". Have good close up photo I could email, if helpful. Like to know WHERE and WHEN made and general QUALITY when new.

    Other gun details: Wm Moore & Co. London Fine Twist 12 g initials J R and #13 under each barrel. Plus two sets of "stamps of some symbol," as on other gun. Again, like to know WHEN and WHERE made and general QUALITY when new. Also have photos.

    MANY thanks for any thoughts! :-)
    · Share on FacebookShare on Twitter
  • Options
    socrchiksocrchik Member Posts: 10 ✭✭
    edited November -1
    i was given this by an old friend so it will never be sold, i need info for insurance purposes. i could not find anything in 2005 catalog of firearms. thanks.<a href="http://photobucket.com/&quot; target="_blank"><img src="http://i115.photobucket.com/albums/n312/sherpa_01/IMG_1012.jpg&quot; border="0" alt="Photobucket - Video and Image Hosting"></a>
    · Share on FacebookShare on Twitter
  • Options
    socrchiksocrchik Member Posts: 10 ✭✭
    edited November -1
    I have a old 32-20 cal, falling block,lever action,single shot rifle that has Made by Birmingham Small Arms Co. Ltd stamped on one side of the reciever and Commonwealth of Australia W.A. stamped on the other side of the reciever. I would like to find out any information about this rifle and approximately what it is worth. Thank You for any information.
    · Share on FacebookShare on Twitter
  • Options
    socrchiksocrchik Member Posts: 10 ✭✭
    edited November -1
    I have a bolt-action rifle made by C.J. Hamilton & Sons.
    It has No. 43 on it.
    It is .22 caliber. short??
    Made in Plymouth Michigan?? Around 1900-1907??

    Is this gun which looks like a toy gun worth anything?
    If so what is the value? I would say about 50%.
    Still shoots.
    · Share on FacebookShare on Twitter
  • Options
    socrchiksocrchik Member Posts: 10 ✭✭
    edited November -1
    At the local gun/dog trade show I found an old side by side 12 guage that was in pretty good condition. After inspecting it I found it to be in better shape than I thought, as it was very tight in all the right spots like the hinge area where it breaks and once locked back down it doesn't budge with a firm click!
    Everyone kept asking me as I walked around with it in my arms "Hey...wht do you want for the old STEVENS?" .
    It says no where on the gun "Stevens". It only says................... "The Sportsman"
    CLEVELAND
    I found the following in an artical after my own confusion and research on this nice gun.

    The Sportsman: Trade name used by the H. & 0. Folsom Arms Company on firearms made for
    the W. Bingham Company of Cleveland, Ohio.

    Now the question remains...What is it?
    By the way ...I gave $150.oo for it.
    I forgot to add this bit of info...It has a number 1500 stamped into the side of the gun near the trigger guard. It also has stamped in the breach area behind the hinge portion..E O then "in circles beside that" is A E. It also has in smaller stampings on each side of the breach area an 8 then on the other side a "v". I have found in the past that these markings would identify the date and things of manufacturing.


    JIM
    · Share on FacebookShare on Twitter
  • Options
    socrchiksocrchik Member Posts: 10 ✭✭
    edited November -1
    I have a 12 ga. over/under that I do not know anything about on the side of the gun is stamped:

    FABBRICA ARMI FAUSTI STEFANO
    MARCHENO V.T. (BS)
    CANNE CROMATE

    ANY INFO YOU MAY HAVE WOULD BE GREATLY APPRECIATED!
    · Share on FacebookShare on Twitter
  • Options
    charliemeyer007charliemeyer007 Member Posts: 6,579 ✭✭✭
    edited November -1
    Likely an RG. Not noted for being a high quality. Pic is too small.
    · Share on FacebookShare on Twitter
  • Options
    p3skykingp3skyking Member Posts: 25,750 ✭
    edited November -1
    Does it say Hialeah, Florida on it anywhere?
    · Share on FacebookShare on Twitter
  • Options
    mark christianmark christian Forums Admins, Member, Moderator Posts: 24,456 ******
    edited November -1
    Looks like an RG-63 but the postage stamp sized photos makes seeing any details impossible. Value would be about fifty bucks...If it is complete and is fully functional.
    · Share on FacebookShare on Twitter
  • Options
    claysclays Member Posts: 1,916 ✭✭✭✭
    edited November -1
    Looks just like a Hy-Hunter I have. Not much quality, but I have killed a boat load of snakes with it.
    · Share on FacebookShare on Twitter
  • Options
    Spider7115Spider7115 Member, Moderator Posts: 29,714 ******
    edited November -1
    quote:Originally posted by mark christian
    Looks like an RG-63 but the postage stamp sized photos makes seeing any details impossible. Value would be about fifty bucks...If it is complete and is fully functional.

    Let's enlarge them...

    7h0q.png
    kdcv.png
    · Share on FacebookShare on Twitter
  • Options
    babunbabun Member Posts: 11,054 ✭✭✭
    edited November -1
    That looks like a Frontier model 2/59 made by JP Sauer & sohn GmgH.
    · Share on FacebookShare on Twitter
  • Options
    MFIMFI Member Posts: 7,899 ✭✭✭
    edited November -1
    Thats exactly what it looks like to me as well..
    · Share on FacebookShare on Twitter
  • Options
    hrfhrf Member Posts: 857 ✭✭✭✭
    edited November -1
    quote:Originally posted by babun
    That looks like a Frontier model 2/59 made by JP Sauer & sohn GmgH.



    +1. The RG-63 has a different shaped hammer and a front sight on a sleeve.
    · Share on FacebookShare on Twitter
  • Options
    Henry0ReillyHenry0Reilly Member Posts: 10,878 ✭✭✭
    edited November -1
    I have a Herbert Schmidt that looks a lot like that but all the examples I've seen by them are clearly marked.
    I used to recruit for the NRA until they sold us down the river (again!) in Heller v. DC. See my auctions (if any) under username henryreilly
    · Share on FacebookShare on Twitter
  • Options
    mark christianmark christian Forums Admins, Member, Moderator Posts: 24,456 ******
    edited November -1
    quote:Originally posted by hrf
    quote:Originally posted by babun
    That looks like a Frontier model 2/59 made by JP Sauer & sohn GmgH.



    +1. The RG-63 has a different shaped hammer and a front sight on a sleeve.


    You guys are correct and my thanks to Spider for enlarging those photos...My old and very weak eye appreciate it!
    · Share on FacebookShare on Twitter
Sign In or Register to comment.