In order to participate in the GunBroker Member forums, you must be logged in with your GunBroker.com account. Click the sign-in button at the top right of the forums page to get connected.

really need help

doncislerdoncisler Member Posts: 11 ✭✭
edited March 2002 in Ask the Experts
i really need help disassembling the striker and spring from a stevens model 416 .22-cal target rifle. anyone know how or where to find a diagram / cutaway drawing??
· Share on FacebookShare on Twitter

Comments

  • Der GebirgsjagerDer Gebirgsjager Member Posts: 1,673 ✭✭
    edited November -1
    There is a parts diagram in the Numrich Gun Parts Corp. catalog. I have worked on these before and they are tricky. The striker is retained in the cocking piece by a cross pin. The striker has a hole in its tail to accomodate this pin, and the mainspring is held captive on the striker's tail by a "C" clip. The bolt head is also held on by a cross pin, and it contains the firing pin and firing pin extension. You can get the idea from the above mentioned diagram, as the parts are shown laid out in order of assembly. If you do not have a copy of the catalog I will be happy to mail you a xerox copy of the diagram. Send your address to: ccnorth@teleport.com
    · Share on FacebookShare on Twitter
  • doncislerdoncisler Member Posts: 11 ✭✭
    edited November -1
    ccnorth@teleport.comthank you so much for your reply. the diagram is great. when i looked at the c-clip from the end of the bolt it looked for all the world like a solid disc - couldn't come out of the slot. there must be a way to push down on the other half to relieve pressure and force the c-clip out. it doesn't move easily!!!thanks again, don
    · Share on FacebookShare on Twitter
Sign In or Register to comment.