In order to participate in the GunBroker Member forums, you must be logged in with your GunBroker.com account. Click the sign-in button at the top right of the forums page to get connected.

Powder for 45-70

austrian magnumaustrian magnum Member Posts: 39 ✭✭
edited March 2002 in Ask the Experts
Hello,what do you think is the best powder for full power loads?Thanks

Comments

  • gruntledgruntled Member Posts: 8,218 ✭✭
    edited November -1
    Depends VERY much on what gun you intend to fire it in. The loads for a Ruger # 3would turn my Trapdoor into a hand grenade.
  • SNIPER1048SNIPER1048 Member Posts: 144 ✭✭✭
    edited November -1
    LOOK IN THE LYMAN 47TH EDITION HAND BOOK FOR LOADS FOR ALL THE DIFFERENT RIFLES. VAST DIFERENCE IN LOADS BUT FOR REALISM TRY 70 GRAINS OF FFFG BLACK POWDER PUSHING A 405 GRAIN LEAD BULLET. USE MAGNUM PRIMERS AND ROLL THEM THOUGH YOUR LEVER ACTION AS FAST AS YOU CAN. THEN WAIT 10 MIN. FOR THE SMOKE TO CLEAR. DON'T DO THIS UNLESS YOUR ARE DOWN WIND AT THE RANGE
    "START THE BALL ROLLING THERE, TECTOR"
  • 22WRF22WRF Member Posts: 3,385
    edited November -1
    For what rifle & Wt bullet we are talking 300 to 400 gr bullets here. Hercules 2400 or reloader 7 I have charge wts for.
  • steve45steve45 Member Posts: 2,940 ✭✭✭
    edited November -1
    There are three different load levels based on the rifle that you are loading for. Level one is for original trapdoor springfields and rolling block rifles. I load these with blackpowder only. There are smokeless powder loads for these rifles but Im not familar with any. Level two is for lever action rifles like the marlin 1895 and winchester 1886. The powder I use for these is 4064 book maximum load 56 gr. for 405 gr. bullet. Unless used for hunting purposes I load mine to 52 gr. Level three is for ruger #1 or #3(if you can handle serious recoil out of this light carbine) or modern bolt action rifles. Again 4064 is the powder I use book maximum 64 gr. with 405 gr. bullet. This is a stout load not too far from .458 mag ballistics. You should always start 10% less than maximum and work your way up to max loads. If you are shooting older rifles or just for fun Id recommend shooting lighter loads than max. Hope this explains a little, let me know what bullet you want to use and I can look it up.
  • califsaecocalifsaeco Member Posts: 27 ✭✭
    edited November -1
    I have 3 California Saeco 1977 production of "Competition Winning" bullet molds in 4 cavities 344 gr rn with gunstock walnut handles on a list of 70s saeco stuff for sale JP saeco95687@yahoo.com
Sign In or Register to comment.