In order to participate in the GunBroker Member forums, you must be logged in with your GunBroker.com account. Click the sign-in button at the top right of the forums page to get connected.

grendell .380

azzeaterazzeater Member Posts: 187 ✭✭✭
edited July 2002 in Ask the Experts
Anyone know where i can get parts for a grendell .380 auto???? I guess it doesn't have a mag. it has a speedloader??????? It's my workmate's gun

hey all!
· Share on FacebookShare on Twitter

Comments

  • nunnnunn Forums Admins, Member, Moderator Posts: 36,078 ******
    edited November -1
    Birmingham Pistol Wholesale, formerly Birmingham Pistol Parlor, bought ALL the remaining parts inventory when Grendel went out of business. They are in Alabama and used to advertise in Shotgun News. You will have to to some looking to find them.

    Some of the gunsmiths that did work at Grendel now work at Kel-Tec.

    The last time I needed Grendel work done, it required a joint effort between BPW and a friendly smith at Kel-Tec.

    Speedloader? All it is is a M16 stripper clip.

    SIG pistol armorer/FFL Dealer/Full time Peace Officer, Moderator of General Discussion Board on Gunbroker. Visit www.gunbroker.com, the best gun auction site on the Net! Email davidnunn@texoma.net

    Edited by - nunn on 07/09/2002 21:34:35
    · Share on FacebookShare on Twitter
  • leeblackmanleeblackman Member Posts: 5,303 ✭✭
    edited November -1
    You also need a special tool for loading. Like a stripper clip charger. It guides and holds the stripper clip in place while you push the bullets into the magazine. I advise buying two, so when you loose one, you'll have the other spare.

    If I'm wrong please correct me, I won't be offended.

    The sound of a 12 gauge pump clears a house fatser than Rosie O eats a Big Mac !
    · Share on FacebookShare on Twitter
  • spclarkspclark Member Posts: 408 ✭
    edited November -1
    A local range / gunshop has several barrel replacements for the .380. I looked at 'em when I had a P30 & then saw that they weren't for the .22WMR. Let me know if you're interested; they didn't want much for 'em then & probably don't now - if they're still there.
    · Share on FacebookShare on Twitter
  • azzeaterazzeater Member Posts: 187 ✭✭✭
    edited November -1
    spclark, what gun range did you see those barrels at? If you have a moment drop an answer please. Thank you!

    hey all!
    · Share on FacebookShare on Twitter
  • azgunnut2@yahoo.comazgunnut2@yahoo.com Member Posts: 305 ✭✭✭
    edited November -1
    O.K. , first of all : good luck with the grendel , some of them worked just fine ...we do "smithing " on these , and have contact with
    the persons who really bought the "parts" when grendel closed ,,,its a very nasty rumor that grendel & keltec are connected , just contact keltec and see the response...the p10 uses m16 stripper clips to "speed load", no big secret, look at the top of your slide , its cut for these at the back of the ejection port....................
    if you need any help (parts ect...gunsmithing), please contact us....
    azgunnut2@yahoo.com

    Join / Support the NRA
    Guns are my friends !!!
    · Share on FacebookShare on Twitter
  • spclarkspclark Member Posts: 408 ✭
    edited November -1
    quote:
    spclark, what gun range did you see those barrels at? If you have a moment drop an answer please. Thank you!


    I live out Northwest of Chicago; if yo like, I'll check & see if they still have 'em. Let me know.
    · Share on FacebookShare on Twitter
Sign In or Register to comment.