In order to participate in the GunBroker Member forums, you must be logged in with your GunBroker.com account. Click the sign-in button at the top right of the forums page to get connected.

Favorite 22-250 reloads ?

old single shotsold single shots Member Posts: 3,594
edited April 2002 in Ask the Experts
I am getting ready to reload for this cartridge for the first time in years.Since i last reloaded for the 22-250 there have been many new bullets and powders.I would like to hear what your favorite bullet--powder combos are.Thanks

Comments

  • groundhog devastationgroundhog devastation Member Posts: 4,495
    edited November -1
    40 grains of Win.760, Fed Match or CCI-BR2 and 52gr Fowler. Also works with 52gr.Sierra or 53gr.Horn. Hornady is a blood and guts bullet!!!!! GHD
  • Richie RichRichie Rich Member Posts: 439 ✭✭✭
    edited November -1
    I have heard and read that hogdon 380 with 38 grains and a 55 gr bullet are supreme, I have made some but have not made it to the range to test. I have however loaded 37 gr. of imr 4831 and a 52 gr match hp that shoot very tight.But I am just getting started with this gun as it is still very new.Rich
    Remember,"your woman may not find you handsome, But atleast she'll find ya handy". I love that show..............
  • coyote-mancoyote-man Member Posts: 78
    edited November -1
    I have tired many a many different loads in this cal. in the last 25 years, in 5 different rifles. You didn't say what kind of shooting you were going to be doing. Will it be target of hunting? Let me know and maybe I can help, for I have shot many different bullets and powders.
  • ClairClair Member Posts: 679 ✭✭✭✭
    edited November -1
    I use 34 grs. of IMR 3031 behind a 55gr. v-max moly.I strongly suggestworking up to this load( or any other load you get)gradually and watch for signs of pressure.
  • boltactionboltaction Member Posts: 505 ✭✭✭
    edited November -1
    Ground Devastation got the right load. I've been shooting 41.5 gr. of 760 win 55gr v-max hor. win primer in my model 70 win varmit special.And it stacks them on top of one another.
  • coyote-mancoyote-man Member Posts: 78
    edited November -1
    Richie Rich,I notice that you showed that you were using IMR 4831, I was wondering what volocity that you are getting with that power.
  • coyote-mancoyote-man Member Posts: 78
    edited November -1
    Richie Rich,I notice that you showed that you were using IMR 4831, I was wondering what volocity that you are getting with that power.
  • coyote-mancoyote-man Member Posts: 78
    edited November -1
    Richie Rich,I see that you are using IMR 4831, what speed is that 52gr. running?
  • groundhog devastationgroundhog devastation Member Posts: 4,495
    edited November -1
    Boltaction, Thanks for the praise! My load is definitely not a maximum load!!! It was just a great load for accuracy and it also was very effective at the terminal end!! I don't think I have ever went up as far as 41.6gr of 760 but might have to try it!! At 40 grains it's easy to figure out how much you're saving by doing all this reloading, 7000gr=1lb, so 1lb=175 shots from a can of powder!! (ha)(ha) Isn't this addiction fun!! GHD
  • gskyhawkgskyhawk Member Posts: 4,773
    edited November -1
    in my rem 788 i use hornady 55 spire pt.with 40 gr of H-380 and a cci 250 pr gives me a ave. of 3683 fps and shots a heck of a lot better than i can 1/2 to 3/4 inch groups at 100 yards are the norm for this rifle
Sign In or Register to comment.