In order to participate in the GunBroker Member forums, you must be logged in with your GunBroker.com account. Click the sign-in button at the top right of the forums page to get connected.

S&W 586

itchy300itchy300 Member Posts: 122 ✭✭
edited November 2013 in Ask the Experts
6" barrel, no dash, blue, factory rubber grips, and the recall has been done. 95% gun. What's the value? I can't post pics so if someone wants me to email the pics so they can post them, I'd be glad to. Potential purchase and all help will be appreciated.

Comments

  • itchy300itchy300 Member Posts: 122 ✭✭
    edited November -1
    My 586 has the dash 1 with the 'M' modification. I noted that the dash was an issue with a couple of sellers here. So what gives if the modification was done? Is this supposed to diminish the gun's value? What would an 'expert' value it at? It is nickel w/6" barrel pachmeyer grips, v good cond.
    Thank you!
  • itchy300itchy300 Member Posts: 122 ✭✭
    edited November -1
    AHV64xx serial number
  • charliemeyer007charliemeyer007 Member Posts: 6,572 ✭✭✭
    edited November -1
    There are 108 listings on the auction side for S&W 586. This one is interesting http://www.GunBroker.com/Auction/ViewItem.aspx?Item=373362175

    you could also search the completed auctions for a better match to your conditions.

    added That one just has an add on aftermarket/custom weight.

    You need to sign in on the auction side. Click the advanced search button. Fill in your search terms. Then click the completed button.

    More than 1000 ended. This used one didn't meet the reserve at $440 with 9 bids. http://www.GunBroker.com/Auction/ViewItem.aspx?Item=359493102
  • itchy300itchy300 Member Posts: 122 ✭✭
    edited November -1
    It's not like that one, it's pretty standard. I've never been able to find where the completed auctions were.
  • rufe-snowrufe-snow Member Posts: 18,650 ✭✭✭
    edited November -1
    quote:Originally posted by itchy300
    It's not like that one, it's pretty standard. I've never been able to find where the completed auctions were.



    Here is a link to the completed auctions page.

    All that you have to do is to fill in the blanks.


    http://www.GunBroker.com/Auction/SearchForm.aspx?Tab=1
  • dcs shootersdcs shooters Member Posts: 10,870 ✭✭✭
    edited November -1
    quote:Originally posted by itchy300
    It's not like that one, it's pretty standard. I've never been able to find where the completed auctions were.


    ADVANCED SEARCH gets you there [;)]
  • itchy300itchy300 Member Posts: 122 ✭✭
    edited November -1
    Got that. Can someone tell me when it was Made?
  • dcs shootersdcs shooters Member Posts: 10,870 ✭✭✭
    edited November -1
    quote:Originally posted by itchy300
    Got that. Can someone tell me when it was Made?


    '86-90 somewhere in there.
  • itchy300itchy300 Member Posts: 122 ✭✭
    edited November -1
    Pros and cons of them? I've never had one or shot one.
  • 62fuelie62fuelie Member Posts: 1,069 ✭✭✭
    edited November -1
    Pros: The under-lug gives a slightly better muzzle biased weight balance for shot to shot recovery and sighting stability; the frame is slightly heavier/thicker than the K-frames for durability with full-house loads; the trigger geometry has been tweaked for even smoother more consistent pull for double action shooting; it uses K-frame grips, so it fits smaller hands but can have larger grips put on to suit other's needs.
    Cons: It is a little heavier so for a gun that will be "carried a lot and only shot a little" the weight on the hip may be a factor (that being said, I walked a beat with a 6" M-28 "Highway Patrolman" in a Hoyt break-front for some time and it didn't kill me).
  • beantownshootahbeantownshootah Member Posts: 12,776 ✭✭✭
    edited November -1
    quote:Originally posted by itchy300
    Pros and cons of them? I've never had one or shot one.

    Compared to the standard medium "K" frame Smith guns, these "L" frame guns are heavier, making them a little harder to carry but nicer to shoot.

    Barrel lug reduces muzzle flip, but also makes gun a tiny bit slower to point. (See how every positive could also be a negative, depending on your perspective?).

    Main point/advantage of these is that the forcing cone has been beefed up to handle a steady diet of full .357 magnum loads. The K-frame guns don't really like the full power loads (especially lighter 125 bullet weight ones) and can develop cracks in the forcing cone and other issues with lots of full power magnum rounds.

    The guns are just intrinsically tougher than the K-frames, which really were an evolution of a 19th century design originally intended for low pressure black-powder rounds.
Sign In or Register to comment.