In order to participate in the GunBroker Member forums, you must be logged in with your GunBroker.com account. Click the sign-in button at the top right of the forums page to get connected.

removing lead buildup

digsterdigster Member Posts: 26 ✭✭
edited April 2002 in Ask the Experts
I have a High Standard 22 with a muzzle brake. There is a significant build up of lead in the pocket below the bore. I've some questions: Does this build up indicate some kind of misalignment which would affect the accuracy? I have only fired about 100 rounds offhand and the results are poor, probably due to me. What kind of accuracy should I expect, say with a rest. Also would a bore cleaner as discussed back on 4/3/02 be useful in removing the lead? If so will the amonia harm the finish on the outside of the barrel? Thanks for any help.
· Share on FacebookShare on Twitter

Comments

  • He DogHe Dog Member Posts: 51,593 ✭✭✭✭
    edited November -1
    If you use J-B Bore Paste or Butch's Bore Shine, no they will not hurt the bluing. The Butch's can be hard on some finishes, so don't spill or drip any on your favorite walnut grips.
    · Share on FacebookShare on Twitter
  • jonkjonk Member Posts: 10,121
    edited November -1
    Don't leave this stuff on for too long as it is mildly acidic, but if you mix a 50/50 mix of hydrogen peroxide and white vinegar and let it sit a minute or so, you will get a gooey paste of lead out. Works and is easy to make!
    "...hit your enemy in the belly, and kick him when he is down, and boil his prisoners in oil- if you take any- and torture his women and children. Then people will keep clear of you..." -Admiral of the Fleet Lord Fisher, speaking at the Hague Peace Conference in 1899.
    · Share on FacebookShare on Twitter
  • compgunfirecompgunfire Member Posts: 95 ✭✭
    edited November -1
    Try using "Shooter's Choice - Lead Remover" and/or "RB-17" as a bore cleaner to remove that lead buildup. Most bore cleaners/solvents in general will remove "lead fouling". A chemical cleaner like the two cited above will do a better job and will not harm the finish.
    · Share on FacebookShare on Twitter
  • digsterdigster Member Posts: 26 ✭✭
    edited November -1
    Thank you Jonk, the vinager and peroxide mix worked like a charm.
    · Share on FacebookShare on Twitter
Sign In or Register to comment.