In order to participate in the GunBroker Member forums, you must be logged in with your GunBroker.com account. Click the sign-in button at the top right of the forums page to get connected.

Scope

max rangermax ranger Member Posts: 21 ✭✭
edited July 2002 in Ask the Experts
I am looking for a good..not great scopr for a Winchester Model 70 30-06. The P.O.S on it now has such a narrow field of view. I would like one that allows for more of a full field view. Any suggestions?
· Share on FacebookShare on Twitter

Comments

  • max rangermax ranger Member Posts: 21 ✭✭
    edited November -1
    I bought a ART II scope and it looks to be in good shape.
    Can any body tell me who made it,and any value. The only thing I can see wrong with it is a little foging on the lense.Is there any body who can work on it?
    Thanks
    · Share on FacebookShare on Twitter
  • max rangermax ranger Member Posts: 21 ✭✭
    edited November -1
    Can a rifle scope be used on a shotgun? I have a 3x9 that I was thinking about putting on my fully rifled 11/87.
    · Share on FacebookShare on Twitter
  • max rangermax ranger Member Posts: 21 ✭✭
    edited November -1
    I have a cva 50 cal I would like to put a scope on it for deer hunting does anyone have any ideas on a not real cheap but not top dollar scope good for about 100 to 150 yards
    · Share on FacebookShare on Twitter
  • max rangermax ranger Member Posts: 21 ✭✭
    edited November -1
    I am mounting a new scope on my 7 mm the front of the scope touches the barrol should I get taller rings or shim the front it is a simmons scope 3x9x50 if that helps
    · Share on FacebookShare on Twitter
  • max rangermax ranger Member Posts: 21 ✭✭
    edited November -1
    Dang, Polaris 700 is what I have too.
    · Share on FacebookShare on Twitter
  • max rangermax ranger Member Posts: 21 ✭✭
    edited November -1
    I have a pre 64 Model 70 in 270 that has a Leupold 3 x 9 VXII. It works find but Id like to find one that is better in low light. Would ya'll make some suggestions?

    Thank you

    Rex
    · Share on FacebookShare on Twitter
  • max rangermax ranger Member Posts: 21 ✭✭
    edited November -1
    Anyone know who might make a 3x9 scope with a post Thanks Bob
    · Share on FacebookShare on Twitter
  • max rangermax ranger Member Posts: 21 ✭✭
    edited November -1
    does anyone make a scope with a post reticle I herd Nc star mightThanks Bob
    · Share on FacebookShare on Twitter
  • max rangermax ranger Member Posts: 21 ✭✭
    edited November -1
    allright experts! whats the best value in a 100 to 300 yd scope? Not just the cheapest but the best value, i dont mind spending but dont want to just buy a name.
    · Share on FacebookShare on Twitter
  • max rangermax ranger Member Posts: 21 ✭✭
    edited November -1
    Hi,Just mounted the scope on my CVA .50 cal rifle. Does any one have the way a home gunsmith can be sure they have a level horizion line on their scope? Thanks for all the great advise I always get from this site.
    · Share on FacebookShare on Twitter
  • max rangermax ranger Member Posts: 21 ✭✭
    edited November -1
    Would like input on medium priced rifle scope for 223cal. Needs to be bright. Any suggestions.
    · Share on FacebookShare on Twitter
  • max rangermax ranger Member Posts: 21 ✭✭
    edited November -1
    Was wondering. Will a Gamo scope fit my Benjamin 312 rifle with the proper mounts. If so are the mounts available?
    · Share on FacebookShare on Twitter
  • max rangermax ranger Member Posts: 21 ✭✭
    edited November -1
    I have a modle 70 308 win and am in need of a new scope. my problem is that I do not know what I am looking for when I go out to buy one. If any one could give me some tips about buying a scope that would be excellent. thanks chris

    chris bouldman
    · Share on FacebookShare on Twitter
  • max rangermax ranger Member Posts: 21 ✭✭
    edited November -1
    recently bought sonaernice model 70 pre 64 in 308, plan to use as my personal rifle for deer and hogs, hogs out to 300 yds. any reccomendations on brand of scope and rings ?
    · Share on FacebookShare on Twitter
  • max rangermax ranger Member Posts: 21 ✭✭
    edited November -1
    Need some help before i call in the cavalary................ I have a new 3x9 by 40 Leopold scope on my new 223 Remington BDL rifle.....

    I had them mount lower rings (maye my mistake) but the scope just touches the rear ramp..... the edge of the scope.

    Either way, after about 200 rounds of ammo and 5 trips to the range, and countless adjustments....I was able to walk my 5 shot groupings up the paper and to the left so that I am "X" high but still to the right about 2 inches in 50 cent piece groupings..... I'm happy with the performance, but cannot seems to get to the "X".....

    I am stopping at the gun shop today to ask them, but I am not sure if the scope can be zeroed out too far so that it will not adjust anymore...or I may have another issue...

    OK....I'm open for suggestion...and admistrator
    if you could allow this to go to more than 10 if it gets going. Thanks for everyones help (in advance)
    · Share on FacebookShare on Twitter
  • max rangermax ranger Member Posts: 21 ✭✭
    edited November -1
    I mounted a red dot scope on my SuperBlackhawk 44mag my problem is after about 8 shot the scope moves.I have tighten and retighten the screws on the rings.what can I do to stop this from happening.[url][/url]

    Edited by - Max ranger on 07/26/2002 21:49:18
    · Share on FacebookShare on Twitter
  • leeblackmanleeblackman Member Posts: 5,303 ✭✭
    edited November -1
    Sounds like cheap mounts. Replace them with quality mounts. And don't forget to lap the rings.

    Or better yet. Buy a leupold mount and rings. And have a gunsmith install them right.

    If I'm wrong please correct me, I won't be offended.

    The sound of a 12 gauge pump clears a house fatser than Rosie O eats a Big Mac !
    · Share on FacebookShare on Twitter
  • groundhog devastationgroundhog devastation Member Posts: 4,495
    edited November -1
    Replace the red dot with a holosight. No rings to move! If you can find a first generation Holosight you have 2 contact points verses 1 with the second generation. I haven't had problems with the 2nd generation on a Model 29 but I like the first generations better. GHD
    · Share on FacebookShare on Twitter
  • ATFATF Member Posts: 11,683 ✭✭✭
    edited November -1
    You need one thing,LOCKTITE

    ATF
    · Share on FacebookShare on Twitter
  • leeblackmanleeblackman Member Posts: 5,303 ✭✭
    edited November -1
    I backup groundhog on the 1st gen holosight, I like it a whole lot better than the 2nd gen. The only advantage the 2nd gen has is profit margin for bushnell. The 1st gens are awesome.

    If I'm wrong please correct me, I won't be offended.

    The sound of a 12 gauge pump clears a house fatser than Rosie O eats a Big Mac !
    · Share on FacebookShare on Twitter
  • Guns & GlassGuns & Glass Member Posts: 864 ✭✭✭✭
    edited November -1
    Could be: >Threads are now stretched in the ring. Won't hold.
    >Tube can be compressing.
    >Tubes can be flexing during recoil. Most dots are multi piece tube assemblies, and some won't take heavy 'free' recoil like your 44 mag.

    What kind of mount, rings are used?

    Happy Bullet Holes!
    · Share on FacebookShare on Twitter
Sign In or Register to comment.