Ithaca

toold

Did Ithaca make a 12 with a 20" smooth bore barrel with iron sights and a 3" chamber.
I know they made them with a 2 3/4 chamber. I thought all the 3" were rifled barrels.

I don't believe they did but I see one for sale in a local add.

Thanks

Mark

toold

Need help finding d.o.m for model 37 featherlight
standard. s.n. 10137xx Also f. sight is missing,
but no hole in barrel. was it glue on?

thanks for the help. DON

DON

MIKE WISKEY

CANN'T HELP WITH THE MGF. DATE (IT IS A LATTER ONE, MGF. AFTER 1960 OR SO) BUT THE BARREL HAS BEEN CUT. PROBABLY NO CHOKE LEFT.

Prescott Pete

Don,
Look up Ithacagun on the web. Put in the serial# and they will tell you D.O.M.
Hope this helps
Joel

toold

thanks guys will try to look up
don

DON

v35

Check if it's an older one that needs barrel fitting at the factory.
There are gunsmiths that specialize in installing thin wall threaded choke tubes in thin wall or cut off shotgun barrels. They can also install a front sight. The Ithaca style front bead with plastic insert shows up good under dim conditions.
If you end up going for a new barrel go for the ventilated rib.
These are great shooting guns.

bullelk

Probably was cut. Take it to a gunsmith and ask him to check it with a choke guage. He shouldn't charge you much, if at all.

"If All Else Fails, Read The Directions"