Moly Coated Lead Lube?

Mr. Lobo

First of all to those of you that responded to my thread on 45 reloading thank you. The problem was that the sizing die that I bought on $bay had a great depriming pin but no sizing die. Go figure... I bought the whole Dillon set and everything is working great. Thanks. I have been looking at the moly coated lead bullets to help keep the lead buildup down. I found a company that sent me 25 bullets to try out. They have the grove for the lube but I have always bought lubed bullets so this is another step for me. I would like some advise on if the moly-coated bullets need to be lubed and what your recommendations would be on how to and what equipment is needed to lube bullets. I would assume that the bullets are already sized because they have the moly coating on them. Thanks in advance for your help.

Jim

will270win

I would think since moly is slicker'n two greased eels swimmin' in a bucket of snot, lube wouldn't be required. Good question and at least now it's back at the top for a real expert to answer.


~Secret Select Society Of Suave Stylish Smoking Jackets~
Will270win@nraonline.com

Mr. Lobo

BTTT, No takers on this one???