In order to participate in the GunBroker Member forums, you must be logged in with your GunBroker.com account. Click the sign-in button at the top right of the forums page to get connected.

Kahr pm 40

bigmillbigmill Member Posts: 36 ✭✭
edited November 2007 in Ask the Experts
I have a kahr pm40 and have had some issues with it. During the 200rd break in period it had some trouble (a lot) of the slide not engaging all the way. Sometimes it would fall to feed or the slide would be about 1/4 in from being all the flush. It has about 550 rds through it now. It will usually go through the first mag fine but then i had usually the 4th rd not go into battery. I also had the mag release break. there is a small metal part in the release button that broke off. A replacement was sent. My question is has anyone had the same problems and how were they fixed? I know it is sensitive to limp wristing but i have never had that issue with any other gun ive shot. Almost forgot i also have already put wolff spings in the mag and recoil spring
· Share on FacebookShare on Twitter

Comments

  • helimanheliman Member Posts: 597 ✭✭✭✭
    edited November -1
    I had a PM40 and had trouble with masgazine followers breaking, causing failure to eject and feed. Continued to be an issue, so sold it and bought a CW40. No problems with it at all. I'm not very pleased with Kahr customer support. Seemed to get more excuses than assistance. Good luck![B)]
    · Share on FacebookShare on Twitter
Sign In or Register to comment.