ruger 77 trigger help

lock stock and barrel

I have a m77 which shoots great except for the high trigger pull.
where do I get a trigger assembly , who makes them? does the set screw on the trigger I have now adjust anything? Do I need a competant gunsmith to install the new trigger assembly?
info would be apprieciated

"Unless the LORD guards the city, the watchman keeps awake in vain" Psalms 127:1

CAPPER

BROWNELLS catalog 54 page 4 has triggers and sears for the RUGER 77

25-06

LS@B, do you have one of the older 77's with a tang safety or the newer MarkII. If the newer Mark II, replace with the Timney trigger from Brownells. When installed, you will have to file down the safety block on the trigger so the safety will rotate over it. The instructions tell you how, but proceed with caution. If you take off too much, the gun can still fire in the afe position. On the tang safety model, clip the trigger return spring about 1 and 1/2 coils or replace with a lighter one. That should give you about a 3lb. pull.

lock stock and barrel

This has a thumb safety on the tang, thanks for the help! lsb

"Unless the LORD guards the city, the watchman keeps awake in vain" Psalms 127:1

JIM STARK

Timiney makes a drop in ,fully adjustable trigger for that old model ruger.... It's a "no gunsmithing " installation...contact me snake803@juno.com