10mm Rifle - Check out the web site

gap1916

OK 130 have read this post. Someone must have the tools to adjust the mag block and the knowledge to put this together. I will supply all the material and pay for the labor. I want to build a 10mm rifle on the AR rifle system. Oly Arms does this I know. I want to improve on there system. They use UZI 41ae mags and weld a block on to it. I want to use a modified 9mm block used in the Colt 9mm AR and use the 41ae uzi mags the way they were intended. I know this has been done before and have talked to one individual who has done this. I am looking for a gunsmith to help me put this rifle together. I live in New Mexico. The gunsmith does not have to live here, only understand the concept and have the ability to make it all come together. Who is this person? Thank you.OK Take a look at www.bren-ten.com Go to My 10mm Collection. Choose Olympic Arms Car 97/10mm Project.

Greg
Former Marine
A N G L I C O

kingjoey

I have a CNC shop that is going to be building some parts for me, if you have a sample mag I can build a block to fit the AR (I'll use my Bushy for reference) Do you plan on building the block to put the mag at the back of the well (as to use the AR mag release) or towards the front (and incorporate some alternate mag catch)?

Love them Beavers

gap1916

I plan to use the AR mag release. Oly Arms will modify the mags I have the AR Mag Block. I just have to make the mag, Mag block and upper work.

Greg
Former Marine
A N G L I C O

kingjoey

Your block will likely have to incorporate a feed ramp of some sort to guide the bullet into the chamber as it will darn near be out of the mag before it is entering the chamber. Sounds interesting, if I can help out in any way let me know.

Love them Beavers