In order to participate in the GunBroker Member forums, you must be logged in with your GunBroker.com account. Click the sign-in button at the top right of the forums page to get connected.

stevens/savage 94c trigger guard

hijumperrs2hijumperrs2 Member Posts: 70 ✭✭
edited November 2010 in Ask the Experts
i have a stevens/savage 94c that is missing the trigger guard.i will try the want ads next as there is no listings on gb.i have the rear screw.can anyone tell me how the guard works.looks like there is a front screw in the receiver and it threads into the guard from the inside of the receiver.also are there any trigger guards availble. i wanna put the boy behind this gun as his first 12 ga.-any help,or info would be greatly appreciated guys.thanks
· Share on FacebookShare on Twitter

Comments

  • perry shooterperry shooter Member Posts: 17,105 ✭✭✭
    edited November -1
    have you tried Gun Parts INC. they should have a parts break down picture and this will show how it is attached.
    · Share on FacebookShare on Twitter
  • hijumperrs2hijumperrs2 Member Posts: 70 ✭✭
    edited November -1
    thanks guys,i bid on the trigger guard as suggested.it is the right one.been looking for a long time,the boy is going to smile.long history with this gun and has been sitting on the rack for more years then i care to remember.checked out the break down picture and indeed the screw for the front of the guard is done from inside,took out the pins broke it all down and will install the internal screw with a little bit of mild 2 part epoxy into the plastic trigger guard.taking a scrwewdriver to the mill to modify it and parallell ground it to fit the screw head.thanks again guys, i appreciate it!
    · Share on FacebookShare on Twitter
  • hijumperrs2hijumperrs2 Member Posts: 70 ✭✭
    edited November -1
    on a genearal discussion note huntsman53 i too did ait at dix ,basic also.63b10-20-30.served my time in kitzigen,germany for the 10th engr btln cbt 3id.carried a 60 and a tool box and 2 1911's and a m3 grease gun.thanks man for the info and direction.
    · Share on FacebookShare on Twitter
  • hijumperrs2hijumperrs2 Member Posts: 70 ✭✭
    edited November -1
    and for perry shooter,from one drag racer too another i always trust your input and insight ,thanks man
    · Share on FacebookShare on Twitter
  • slumlord44slumlord44 Member Posts: 3,702 ✭✭✭
    edited November -1
    You have it under control. Have one of those in my shop now that I need to dismantel to install that screw.
    · Share on FacebookShare on Twitter
Sign In or Register to comment.