In order to participate in the GunBroker Member forums, you must be logged in with your GunBroker.com account. Click the sign-in button at the top right of the forums page to get connected.

help identify scope rings

roysharoysha Member Posts: 749 ✭✭✭✭
edited April 2004 in Ask the Experts
I have a set of rings that I cannot identify. They are the old style that requires removal of objective and ocular bells to install, in othe words not 2-piece. The bottom clamp area is tapered, wider front to narrower back and the front(?) ring has about a 5/8" width while the rear has about 3/8" width. It would appear that they go on a rifle with integral bases similar to the Sako. As I recall, the older Sakos had a system similar to this but I haven't seen one in years so can't be sure. Any help would be appreciated.

BEER IS PROOF THAT GOD LOVES US AND WANTS US TO BE HAPPY!
· Share on FacebookShare on Twitter

Comments

  • roysharoysha Member Posts: 749 ✭✭✭✭
    edited November -1
    With all these responses, I'm surprized the topic hasn't been locked!

    BEER IS PROOF THAT GOD LOVES US AND WANTS US TO BE HAPPY!
    · Share on FacebookShare on Twitter
  • nmyersnmyers Member Posts: 16,891 ✭✭✭✭
    edited November -1
    Considering that hundreds, maybe even thousands, of different configuration scope rings have been made over the years, it's not surprising that there has been no response.

    Can you borrow a digital camera from someone & post a picture for us? At least then, you'd have a chance of identifying it.

    Neal
    · Share on FacebookShare on Twitter
  • boltthrowerboltthrower Member Posts: 212 ✭✭✭
    edited November -1
    Sounds like Bassington rings. Any notches on the clamp, like shark gills....very small?
    · Share on FacebookShare on Twitter
Sign In or Register to comment.