In order to participate in the GunBroker Member forums, you must be logged in with your GunBroker.com account. Click the sign-in button at the top right of the forums page to get connected.

Ruger Red Label

select-fireselect-fire Member Posts: 69,491 ✭✭✭✭
edited April 2004 in Ask the Experts
Anyone know if you can buy 20ga barrel assembly that will go into the 12ga receiver. in other words do they interchange? That Would ROCK.

thanks od

Comments

  • select-fireselect-fire Member Posts: 69,491 ✭✭✭✭
    edited November -1
    Anyone have one of these O/U shotguns and wanna comment about their features and flaws?
  • select-fireselect-fire Member Posts: 69,491 ✭✭✭✭
    edited November -1
    I just acquired an older Ruger red label 20 ga O/U with 3" chambers. Is it OK to shoot 2-3/4" shells?
  • select-fireselect-fire Member Posts: 69,491 ✭✭✭✭
    edited November -1
    I have a Ruger o/u I got back in 1986 it has mod. and improved cyl. barrells.Question would it devalue the gun if I have screw in chokes installed in it.I want to use it to shoot skeet.Thanks for any replys
  • select-fireselect-fire Member Posts: 69,491 ✭✭✭✭
    edited November -1
    I am fairly new to shooting shotguns. I am planning on purchasing an O/U 12 gauge. Are there less expensive guns that perform as well or better than the ruger red label? This gun will be used mostly for clays but some bird hunting also. Any opinions or experiences would be appreciated. Thanks
  • select-fireselect-fire Member Posts: 69,491 ✭✭✭✭
    edited November -1
    Hi,
    Does anyone know if the receiver for a 28Ga is a different size than the receiver of a 20 ga on the ruger red label?
    Thanks
  • select-fireselect-fire Member Posts: 69,491 ✭✭✭✭
    edited November -1
    I own a Ruger Red label 12 guage. Serial number 410-19851 Can you tell me what year and approximate value. Thanks.....
  • select-fireselect-fire Member Posts: 69,491 ✭✭✭✭
    edited November -1
    I have an older Ruger Red Label in very good condition and don't know where to start to find out what it is worth. The gun I have was not manufactued in the country they are now and it does not have chokes as they did not have them when this one was manufactured. Can someone assist me please?
  • select-fireselect-fire Member Posts: 69,491 ✭✭✭✭
    edited November -1
    I have a older red label with 26inch m/ic barrels fixed chokes.Want to shoot skeet with it.Will I need to have screw in chokes installed or will this gun be alright to use.I shot a pateren and at 40yd's in a 30inch circle 95% & 98% in each tube.I know skeet is shot at a shorter range but will that make that much difference in chokes.Also by adding chokes to a fixed choke gun would that devalue the gun. thanks for any help on this.
  • Laredo LeftyLaredo Lefty Member Posts: 13,451 ✭✭✭
    edited November -1
    SF... I have an older Red Label, prior to screw-in chokes. It is a nice gun, easy and fun to shoot.

    The barrel selector is part of the safety and very easy to use. It fits me well, and points nicely.

    Ruger has always made very nice guns, and the Red Ladels are no exception. I bought mine used from the estate of Col Charlie Beckwith of Vietnam Special Forces fame.
    As I mentioned, mine is an early sample, and I did have it lock up on me. The problem was easily solved by Ruger. I shipped it to them with a letter, and they went through it, fixed the problem, and quickly shipped it back at no charge.

    "Never let school interfere with your education"
  • hslaterprycehslaterpryce Member Posts: 927 ✭✭✭✭
    edited November -1
    I have three; 12 Ga, 20 Ga & 28 Ga. All function flawlessly. All have the "normal" features - screw in chokes, pistol grip or English stock (I prefer pistol grip), are available in various length barrels (I prefer 26"). Trigger pull is acceptable for the type shooting that I do - some clay pigeon practice, but almost exclusively field use. Fit and finish are very good to excellent. The only negative is the weight. I would sure like it if the weight was, say, 8 to 10 oz less; kinda' like the Beretta - the 12 Ga in Beretta is lighter than my 20 Ga. (Beretta also costs ~2.5 times what I would pay for the Ruger)

    But other than that I have NEVER experienced any problems with the Ruger. When I had my shop I always recommended them and I would continue to recommend them today, in any caliber, gauge, action - as a good value for your money.

    Just my opinion.....[:)]
  • v35v35 Member Posts: 12,710 ✭✭✭
    edited November -1
    Was dead set on a Red Label 20 gauge because of its looks, its exceptional reliability history and a stainless frame. Disappointingly, neither pistol grip or English stock model pointed well for me. Both the Citori and Beretta did and both are lighter. A used Beretta came my way and I snagged it.
    Don't go by looks. It's a pain to adapt to a gun that doesnt properly fit you.
  • select-fireselect-fire Member Posts: 69,491 ✭✭✭✭
    edited November -1
    I just bought one as of now. IF I don't like it, someone else can shoot it. We shall see.GB Item 17715845.
  • bobskibobski Member Posts: 17,866 ✭✭✭
    edited November -1
    lifetime warrenty on those guns. i never liked the feel of it in my hands. felt like a 2x4. those that shot with me, shot them well.

    former air operations officer SEAL Delivery Vehicle Team 2. former navy skeet team, navy rifle/pistol team member. co-owner skeetmaster tubes inc.. owner/operator professional shooting instruction.
    Retired Naval Aviation
    Former Member U.S. Navy Shooting Team
    Former NSSA All American
    Navy Distinguished Pistol Shot
    MO, CT, VA.
  • select-fireselect-fire Member Posts: 69,491 ✭✭✭✭
    edited November -1
    bobski, I wanna shoot this O/U. Has 5 chokes that comes with it and two of them are skeet. Will give a report after it arrives.
  • bambihunterbambihunter Member Posts: 10,778 ✭✭✭✭
    edited November -1
    I used to have one of thier all-weather models. While I liked it a lot, I had one major complaint with it. I bought it for waterfowling and it was simply to shiny of stainless to work well for that role. They now offer a matte stainless model that would be better served if you have similar uses for it. In the end, I found I used my Benelli Super Black Eagle more and used it for all hunting (so I didn't have to get used to a different gun for each season). However, I never had any problems at all with the Red Label.
    Fanatic collector of the 10mm auto.
  • Myra-LouMyra-Lou Member Posts: 641 ✭✭✭✭
    edited November -1
    I've got one in 28ga.........love it........works for me........john....

    ....If you have to shoot...SHOOT!...don't talk!
  • THINMANTHINMAN Member Posts: 232 ✭✭✭
    edited November -1
    BOUGHT A WOODSIDE 12 GA. WHEN THEY FIRST BECAME AVAILABLE . THE WEIGHT WAS STILL A LITTLE ON THE HEAVY SIDE FOR MY LIKING. THE RED LABEL IS A GREAT BUY IN COMPARISON TO MANY . BEAUTIFULLY MADE WITH DESCENT WOOD FINISH,FIT , AND CRAFTSMANSHIP . I LOVED EVERTHING ABOUT IT BUT THE WAY IT POINTED , IT DIDN'T POINT WERE I LOOKED . I WAS ONE OF MANY THAT IT JUST DIDN'T FIT . FIT AND FEEL ARE EVERTHING IN A GOOD BIRD GUN OR SKEET/CLAYS GUN. SEE HOW IT POINTS FOR YOU . THE ONLY COMPLAINTS I'VE HEARD ARE THE SAME ONES I'M READING HEAR.FIT/FEEL

    THINMAN
  • tinmantinman Member Posts: 126 ✭✭
    edited November -1
    Im in my third season with the 20 gauge,it performs well. It shoulders well for me as I have a prefrence for a field gun having a longer drop in the stock. As a consequence, there is more felt recoil(kick)
  • tinmantinman Member Posts: 126 ✭✭
    edited November -1
    Im in my third season with the 20 gauge,it performs well. It shoulders well for me as I have a prefrence for a field gun having a longer drop in the stock. As a consequence, there is more felt recoil(kick)
  • tinmantinman Member Posts: 126 ✭✭
    edited November -1
    Im in my third season with the 20 gauge,it performs well. It shoulders well for me as I have a prefrence for a field gun having a longer drop in the stock. As a consequence, there is more felt recoil(kick)
Sign In or Register to comment.