In order to participate in the GunBroker Member forums, you must be logged in with your GunBroker.com account. Click the sign-in button at the top right of the forums page to get connected.

S & W 5906 help

mussmuss Member Posts: 1,311 ✭✭✭✭✭
edited May 2007 in Ask the Experts
How do I get the plastic grip off the gun without breaking it??


Thanks,

Tom
· Share on FacebookShare on Twitter

Comments

  • William81William81 Member Posts: 25,483 ✭✭✭✭
    edited November -1
    1. Make sure it is not loaded....
    2. Drop Magazine
    3. With a punch, allen wrench or other item, drive the pin
    located at the bottom of the grip out.
    4. Put upward pressure (Slow and carful) on the bottom of the grip near the area where the pin was removed
    5. The grip will slide back away from the frame.
    6. Beware of the trigger spring and shaft the spring sit on so as not to loose it.
    7. Grip can now be carefully taken off the frame.

    Hope this helps, I just took mine off just to make sure...
    · Share on FacebookShare on Twitter
  • mussmuss Member Posts: 1,311 ✭✭✭✭✭
    edited November -1
    That was kinda what I figured. Just wanted to get advice before I drove the pin and broke something.

    Thank You.
    · Share on FacebookShare on Twitter
Sign In or Register to comment.