In order to participate in the GunBroker Member forums, you must be logged in with your GunBroker.com account. Click the sign-in button at the top right of the forums page to get connected.

H&R Gunfighter .22 cal pistol

Robert BarberRobert Barber Member Posts: 2 ✭✭
edited May 2007 in Ask the Experts
H&R Gunfighter Model 660, .22 cal pistol.
Down along side the barrel is a tube with a spring inside (spent casing ejector)and this tube is attached to the barrel at the muzzle end with a screw. The screw is broke, I got it out, but I need a new screw. Where can I get one/two??????
· Share on FacebookShare on Twitter

Comments

  • He DogHe Dog Member Posts: 51,593 ✭✭✭✭
    edited November -1
    Try your local gunsmith, it may be a pretty standard screw. If not, try http://www.gunpartscorp.com/
    · Share on FacebookShare on Twitter
  • FatstratFatstrat Member Posts: 9,147
    edited November -1
    Numrich Arms (e-gunparts.com).
    Part # 269490. $1.25 + shipping.
    · Share on FacebookShare on Twitter
  • b.goforthb.goforth Member Posts: 982 ✭
    edited November -1
    the model 660 is a early variant of the popular H&R model 949. the model 660 gunfighter was manufactured in 1960 and 1961 only. it was one of two early western style H&R revolver. the other was the model 600 forty-niner introduced in 1960 and the name changed in 1961 to model 949 forty-niner which stayed in production until 1986.

    the model 660 gunfighter was a six shot version while the model 600/949 were nine shot. the six shot version was reintroduced in 1975 as the model 649/650 in 22/22 magnum combo. do not try to fit a 22 magnum cylinder to the model 660 gunfighter as the bore diameter in slighter smaller than the model 649/650 combo.

    all parts for the model 660 gunfighter and the model 600/949 forty-niner except cylinders and cylinder hand are interchangable.
    bill
    · Share on FacebookShare on Twitter
Sign In or Register to comment.