In order to participate in the GunBroker Member forums, you must be logged in with your GunBroker.com account. Click the sign-in button at the top right of the forums page to get connected.
97 Winchester
RED4
Member Posts: 7 ✭✭
What is the procedure for taking the end off the magazine tube?
I think someone put a stick in the one I just bought, using it for a plug. I can hear it moving back and forth when I tilt the gun.
I think someone put a stick in the one I just bought, using it for a plug. I can hear it moving back and forth when I tilt the gun.
Comments
Depress the spring on the sliding locking pin with the blade of a small screwdriver, and push the pin completely out. Then remove the two screws holding the end plug into the magazine tube, and watch as the plug and magazine spring fly across the room. The wooden dowel can then fall out.