Question on ruger blackhawk 357

boltaction

I have a friend who has an old ruger blackhawk 357 made before the transfer bar .It also had a 9mm cyl. that got lost some time ago.He also lost a screw that held the ejector rod and lost the rod too.Question is where if any could he get the part's to make this gun hole again. would he be able to get a 9mm cyl. from ruger and the other part's needed or is there another gun part's place that sell's part's

moonshine

go to ruger. if you want a new cyl. you will have to send the gun to them for fitting. start here

http://www.ruger-firearms.com/

duckhunter

Ruger will put in the transfer bar but will return the parts.

boltaction

thanks guy's this may help him out

RCrosby

For what it's worth, while true that Ruger would require return of the gun to fit a new cylinder, my experience has been that used cylinders often drop in with no problem. I've had no problems with Ruger returning the original parts, but as a matter of course I now pull the hand, trigger, pawl and hammer before returning old models for any work. They don't seem to mind.