In order to participate in the GunBroker Member forums, you must be logged in with your GunBroker.com account. Click the sign-in button at the top right of the forums page to get connected.

H&R Model 732

nitrousacid069nitrousacid069 Member Posts: 3 ✭✭
edited June 2008 in Ask the Experts
I recently bought a H&R Model 732 32 S&W. First off, Let me say that I am new to gun owenership, so my terminology might be off. This is the problem. When i fire the gun, sometime the tumbler does not spin. Its not often, but god forbid i need to protect myself and it happens then. I need to have this corrected and dont know whats wrong...Is this a common problem with this pistol? From what ive read, they were pretty reliable in their day. Also if you could give me a little information on how old it is and how to decode the serial #, I would appreciate it. The serial number is AF46225. Also, what type of ammunition can i fire through this revolver, i know i can fire 32 shorts, but what about anything else.....

John
· Share on FacebookShare on Twitter

Comments

  • nitrousacid069nitrousacid069 Member Posts: 3 ✭✭
    edited November -1
    I have a 32 caliber H&R Model 732 revolver that belongs to my Dad and is in very good condition. I am not sure he ever fired it as it was mainly purchased for protection in his home. How can I find out how much it is worth today?
    · Share on FacebookShare on Twitter
  • b.goforthb.goforth Member Posts: 982 ✭
    edited November -1
    john,
    your revolver was manufactured in 1969 and it will chamber and fire the 32 S&W or the 32 S&W Long. the gun should be checked by a qualified gunsmith. for more information see the answer i posted to your question on the other forum you posted to.
    bill
    · Share on FacebookShare on Twitter
  • pelethpeleth Member Posts: 1 ✭✭
    edited November -1
    I also have an H&R 733. "Side Kick" is engraved on the barrel. serial # AA169(XX). I believe my father-in-law would have purchased it. I have no idea when, but long ago (70s or earlier).
    It appears to me a shell has misfired and slightly bent the chamber guard on left side. Odd place, in my opinion.
    Barrel spind perfectly and gun still fires fine.
    I plan to use it for trade value on a new semi auto.
    Because the value probably is not high, should I have a gunsmith repair before or trade it in "as is" in your opinion? Just looking for some experienced advice.

    joe
    · Share on FacebookShare on Twitter
  • b.goforthb.goforth Member Posts: 982 ✭
    edited November -1
    joe,
    your revolver was manufactured in 1964. i am not sure what it is that you are refering to as a chamber guard so it is not possible to comment cost of repairs. since this revolver is worth about $200 in 100% like new condition and gunsmithings charges can be high, i will leave it up to you if any money should be spent on it.
    bill
    · Share on FacebookShare on Twitter
  • 32 Magnum32 Magnum Member Posts: 820 ✭✭✭✭
    edited November -1
    Nitrous -
    I believe you are referring to the "recoil shield" - the hemispherical extension out from the frame that covers the rear side of the cylinder when it is closed???? The "bent out" area is a normal feature - it helps guide the cylinder axis pin in place when the cylinder is closed. Nothing to fix.
    Jim Hauff
    · Share on FacebookShare on Twitter
Sign In or Register to comment.