In order to participate in the GunBroker Member forums, you must be logged in with your GunBroker.com account. Click the sign-in button at the top right of the forums page to get connected.

Weaver V9 scope?

wpagewpage Member Posts: 10,201 ✭✭✭
edited May 2010 in Ask the Experts
Having some issues dialing in good accurate groups with a Weaver V9 scope...
Is there anything odd about the adjustments on these scopes?
· Share on FacebookShare on Twitter

Comments

  • asphalt cowboyasphalt cowboy Member Posts: 8,904 ✭✭✭✭
    edited November -1
    What kind of issues are you having? Is it stringing or patterning like a shotgun?
    Has the mount system been properly aligned, lapped and screws torqued as they should be?
    · Share on FacebookShare on Twitter
  • sandwarriorsandwarrior Member Posts: 5,453 ✭✭✭
    edited November -1
    It sounds like when you adjust the poi isn't moving to where you put it. First thing I would do is a box test and see just exactly how much each click moves the reticle. Start with at least 10 clicks (20 would be better) and do a box test. That is move up, then mover over, then down and back to where you started.

    Of course that is after you have checked bases and rings for security.
    · Share on FacebookShare on Twitter
  • wpagewpage Member Posts: 10,201 ✭✭✭
    edited November -1
    Thanks for that just noticed that the loads I bought here thinking were factory. Some appear to be reloads and this could add to the flyer problems...
    Back to square one.
    · Share on FacebookShare on Twitter
Sign In or Register to comment.