Beretta 92FS

maxellud

I have a beretta 92fs and i have problems when it tries to feed a round after shooting a round. The next round james as it comes out of the mag and tries to enter the chamber. It seems to happen when i use the after market mags i have for it. They are promag and usa mag. The factory ones work ok. Just so all the information is out there i am using CCI blazer 115 gr FMJ ammo. Am i the only one who has this problem?I also have a problem with the slid not staying open after the last shot is fired. the gun does it about 1 out of 5 times. It does not seem to matter witch mags i use it will not stay open and then sometimes i dryfire the gun with nothing in the chamber. The beretta is only a few months old and i bought it new i have only put about 1500 rounds into it.

maxellud

I recently purchased a 92 and I must say I am very happy with it. I did wonder however, if anyone has any experience adjusting the rear drift sites? No matter what, I shoot to the left consistently but I do not want to damage the sites trying to adjust them since I have not attempted it before. Any help would be greatly appreciated.



Jeff

maxellud

What is the differences between the American and Italian made Beretta 9mm? Which one is more reliable? I would assume that the US armed forces use the American made. Thanks!

maxellud

Looking for the slide to a Beretta 92fs. I do not need the barrel.
Any ideas where to go to find one?

maxellud

I just purchased a Beretta 92FS and am looking for any videos or manuals (other than what came with the pistol) that show how to field strip the pistol? Also, can I use 15 round magazines instead of 10 round in the weapon?

maxellud

what is the quality difference between the U.S. gun and the italy made? thanks

leeblackman

Field stripping is very simple. Remove the magazine, and make sure your gun is unloaded (check the chamber too). Lock the slide back. Hold down the little button on the opposite side of the take down lever, and turn the takedown lever down. Then hold the slide while releasing it and pull it off the front. Then your in business.

Yes you can use preban magazines in your gun.

jsergovic

You can get the manual here:
http://www.berettausa.com/customer/request_manual.cfm
Or just call them. They love to talk about Berettas.