In order to participate in the GunBroker Member forums, you must be logged in with your GunBroker.com account. Click the sign-in button at the top right of the forums page to get connected.

Marlin 36 stock and forend

x2crossx2cross Member Posts: 3 ✭✭
edited April 2008 in Ask the Experts
Have a marlin 36,but need new stock
and forend.
· Share on FacebookShare on Twitter

Comments

  • dcs shootersdcs shooters Member Posts: 10,870 ✭✭✭
    edited November -1
    You need to post this in the Wanted forum [;)]
    · Share on FacebookShare on Twitter
  • vdms55vdms55 Member Posts: 298 ✭✭
    edited November -1
    you can also find Wenig.com or American Stock Co. on line. if one of these guys can't help you it doesn't exist
    · Share on FacebookShare on Twitter
  • RCrosbyRCrosby Member Posts: 3,808 ✭✭✭
    edited November -1
    My 36 appeared to be so close to the 336 that it might pay to see if the 336 stock would work on the 36. They have to be darn close and maybe a lot more plentiful. I figured out once what the differences actually were between the two, but they (it?) escape me at the moment.
    Good luck.
    · Share on FacebookShare on Twitter
  • MIKE WISKEYMIKE WISKEY Member Posts: 10,046 ✭✭✭✭
    edited November -1
    "My 36 appeared to be so close to the 336 that it might pay to see if the 336 stock would work on the 36."... the m-336 stock is different, try 'pressision gun works' in texas. they make quality repro stocks.
    · Share on FacebookShare on Twitter
  • x2crossx2cross Member Posts: 3 ✭✭
    edited November -1
    The barrel band on my 36 marlin is all the way at
    the end of the forend ,so a 336 forend will not work.
    · Share on FacebookShare on Twitter
Sign In or Register to comment.