Kimber lubrication

peddler

Kimber manual says to use a high tech gun oil such as Shooters Choice fp-10 to lub their guns and grease is not recommended. Has anyone used this fp-10? What lub is best for a new auto? Thanks

rufe-snow

Lately I've been using Rem Oil on all the guns, both for cleaning and lubrication. It seems to do a OK job. All the wally worlds carry it, and it isn't spendy.

CS8161

Any good quality gun oil will do the job, even good old Hoppes!

tsr1965

I use a product called Tri-Flow. It is a teflon based lube, similar to BreakFree CLP. It penetrates, protects, and lubricates. I also use a little lithium grease on some critical spots on the slide and frame interface.

http://www.triflowlubricants.com/

Best

perry shooter

FP 10 is very good lube . I don't use grease on semi auto pistols but I do use a mix of 50% marvel mystery oil and 50% of STP on small high load areas like Slide stop pin where it contacts the fitted bottom locking lugs on all my match pistols. On standard pistols with loose tolerances, oil will be all you need .

peddler

What about somthing called Slide Guide?