In order to participate in the GunBroker Member forums, you must be logged in with your GunBroker.com account. Click the sign-in button at the top right of the forums page to get connected.
Options

Marlin 50 and A1 question

DokeyDokey Member Posts: 941 ✭✭✭
edited July 2012 in Ask the Experts
Does the Marlin model 50 and A1 semi auto 22's use the same bolt?
· Share on FacebookShare on Twitter

Comments

  • Options
    TRAP55TRAP55 Member Posts: 8,270 ✭✭✭
    edited November -1
    No, the Model 50 was an open bolt, the A1 was closed bolt.
    That said, I've found there is some confusion on the A1 designation. The first model 50 had no extractor, the later made rifles have a manual extractor on the front right side of the receiver. They were called Model 50 A1 too, and they do use the same bolt.
    If you have a picture to post, I can probably tell you which one you have.
    · Share on FacebookShare on Twitter
  • Options
    DokeyDokey Member Posts: 941 ✭✭✭
    edited November -1
    Mine has an extractor on the R/S of the bolt
    · Share on FacebookShare on Twitter
  • Options
    DokeyDokey Member Posts: 941 ✭✭✭
    edited November -1
    Mail sent
    · Share on FacebookShare on Twitter
Sign In or Register to comment.