In order to participate in the GunBroker Member forums, you must be logged in with your GunBroker.com account. Click the sign-in button at the top right of the forums page to get connected.

Kel-Tec P11 w/ P40 Conversion

dheffleydheffley Member Posts: 25,000 ✭
edited June 2003 in Ask the Experts
Is it true that the Kel-Tec P11 can us the Kel-Tec conversion kit and it still uses the same magazine?

Measure twice, cut once.
calipers_open_close_md_wht.gif
Empty the clip!
smoking_gun_md_wht.gif
· Share on FacebookShare on Twitter

Comments

  • PearywPearyw Member Posts: 3,699
    edited November -1
    I have one of these and the origonal intention was to use the 9mm magazine with it. It will work better with the 40 S&W magazine as the feed lips on the later versions are different. With the 9mm magazine, the nose of the cartridge will hit the feed ramp lower than with 40 mag. This can cause it jam sometimes. I polished my feed ramp and they work pretty well. The 9mm mag also holds one less round. If you go to the Kel-Tec owners group web page, you can read a good write-up on the 40 S&W magazine problems.
    · Share on FacebookShare on Twitter
Sign In or Register to comment.