In order to participate in the GunBroker Member forums, you must be logged in with your GunBroker.com account. Click the sign-in button at the top right of the forums page to get connected.
Options

12 gauge choke tube sizes

limekilnlimekiln Member Posts: 6 ✭✭
edited March 2006 in Ask the Experts
does anybody have size chart for choke tubes, like whats the difference between full trap and extra full turkey? see lots of listings on gb but very few actual sizes
· Share on FacebookShare on Twitter

Comments

  • Options
    7mmbr7mmbr Member Posts: 136 ✭✭✭
    edited November -1
    Try BrileyChokes.com and see what they have. They shouldd be able to answer any questions you have.
    · Share on FacebookShare on Twitter
  • Options
    select-fireselect-fire Member Posts: 69,453 ✭✭✭✭
    edited November -1
    Just a little hint: All guns don't shoot the same size the same way. Just cause the choke is smaller may not make the gun shoot tighter. You can go too far and crush the lead when going thru the constiction of the choke. Then you will have ..flyers..
    · Share on FacebookShare on Twitter
  • Options
    makindumakindu Member Posts: 382 ✭✭✭
    edited November -1
    Here is a listing of just about every shotgun tube currently in use. Keep in mind that 'back-bored' barrels will have wider openings than standard choke tubes to achieve the same pattern. Yes, there is wide variation even within the same gauge, depending on the manufacturer. The page is huge, and will load slowly if you just have a dial-up modem. And remember, you really have to actually pattern your shotgun on paper to see how it really performs with different sizes of shot and different choke tube constrictions.
    http://www.outdoorguides.com/outdoor/shottube.htm
    · Share on FacebookShare on Twitter
  • Options
    TRAP55TRAP55 Member Posts: 8,270 ✭✭✭
    edited November -1
    This is Brownings Chokes and dimensions.
    BrowningChokeSizes.jpg
    · Share on FacebookShare on Twitter
Sign In or Register to comment.