In order to participate in the GunBroker Member forums, you must be logged in with your GunBroker.com account. Click the sign-in button at the top right of the forums page to get connected.
Options

my broken Uberti SAA

0oAKo47o00oAKo47o0 Member Posts: 409 ✭✭
edited May 2014 in Ask the Experts
Posted a month or so back when my cylinder stop broke. Well I took it apart and found indeed the wire spring had a hair line crack and some foreign matter attached. re assembled the firearm and to my amazement the cylinder stop is working again but now it goes straight from hammer down to full cock, no 4 clicks, no half cock. wondering where I went wrong. Maybe a part not quite in the right spot?
· Share on FacebookShare on Twitter

Comments

  • Options
    TRAP55TRAP55 Member Posts: 8,270 ✭✭✭
    edited November -1
    Check where the end of the spring rides on the trigger. If it's just a tad to long, it binds the trigger from catching the hammer notches. Over tightening the trigger screw will do it too.
    · Share on FacebookShare on Twitter
Sign In or Register to comment.